Silicons, Polymers & Rubber

There is a wide range of silicone compounds, emulsions, encapsulants, fluids, foams and gels in addition to greases, moulding rubbers, pastes, primers and other speciality silicones which we supply. Depending on the chosen product and application, silicones demonstrate a high temperature resistance along with good low temperature performance. They have a high degree of elongation and excellent UV stability. Silicones offer excellent water and fire resistance with extended durability over an average of 20 to 30 years or more. A small range of our products are shown below. Please contact us if you can't find your product. Our sales rep is happy to serve you with the product that you need.

Momentive - RTV 102

Description

Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical.

RTV102 will bond to many clean surfaces typically include many metals, glass, ceramic, silicone rubbers and some rigid plastics. For difficult-to-bond substrates, the use of a primer is suggested. Depending on the substrates involved, various primers are recommended for use with these sealants, specifically SS4004, SS4044 and SS4179.

This product is suited for a range of applications including general purpose bonding; sealing; electrical insulation and creating formed-in-place gaskets.

Product Benefits

Easy to use, one-component materialCures at room temperature and ambient humidityOffers self-adhesion propertiesLow temperature flexibilityHigh temperature performanceExcellent weatherability, ozone and chemical resistanceExcellent electrical insulation properties

Technical Properties

Uncured Consistency: PasteColour: WhiteTack-Free Time: 20 MinsCured Shore Hardness: 30 Shore AElongation: 450%Dielectric Strength: 20kv/ mm (500 v/mil)Operating Temperature: -60°C to +204°CIntermittent Temp: +260°C

Product Specifications

FDA ApprovedMilitary Specification: MIL-A-46106Boeing Specification: BAC5010Airbus Qualification: Level P3

Rtv102
Momentive - RTV 157

Description

RTV157 and RTV159 are one-component, ready-to-use, high strength silicone rubber adhesive sealants.
They cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature.
RTV159 sealant also provides high temperature performance. Both of these products release acetic acid
vapors as a by-product of cure.
RTV157 and RTV159 sealants are paste consistency products which can be applied to horizontal, vertical
and overhead surfaces in applications requiring high strength and temperature performance.
Since these adhesive sealants utilize a moisture cure system, they must not be used in thicknesses of
greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials
one-component, addition cure or two-component silicone rubber compounds are suggested.
These sealants were not designed for and should not be used for applications intended for permanent
implantation into the human body.
Key Features and Benefits
High strength
High temperature performance
Low temperature flexibility
One-component
Room temperature cure
General primerless adhesion
Excellent electrical insulation properties
Excellent weatherability, ozone, and chemical resistance

Rtv 157
Dow - Dowsil 732

Description

Dowsil 732 Multi-Purpose Sealant is a one component, non-slumping, silicone paste that is used for bonding and sealing industrial applications. It offers easy application, acetoxy cure system, flexibility, and good dielectric properties.


Rtv732
Dow - Dowsil 730 FS

Description

Dowsil ® 730 FS Solvent Resistant Sealant is a ready-to-use, solventless, nonslumping fluorosilicone rubber paste that reacts with moisture in the air to form a tough, rubbery solid. It is a fluid-resistant material that is ideally suited for use in many applications
where resistance to fumes, splash, and sometimes even total immersion in fuels, oils and solvents is needed. Dowsil 730 FS Solvent Resistant Sealant features good resistance to weathering, vibration, moisture, ozone, and temperature extremes. It retains its flexibility over a wide temperature range from -85 to 500°F (-65 to 260°C). Dowsil 730 FS Solvent Resistant Sealant can be applied overhead or on
vertical surfaces without fear of sagging, slumping or running off.

Dow website

Rtv730
Dow - Dowsil PR 1200 RTV

Description

Dowsil PR-1200 RTV Prime Coat is a one component, dilute solution of silane coupling agents that is used to increase the bonding of room temperature and heat curing silicones to a variety of surfaces such as glass, plastics, metals, ceramics, and masonry. 500 gr Can.

Dow website

Rtv1200
Dow - RTV 1201

Description

Dow Corning 1201 RTV Prime Coat Clear-Yellow is a blend of toluene and acetone solvents that are used for improving the bonding of Dow Corning 3110 and 3120 RTV Silicone Rubber with a variety of materials. 348 g Bottle.

Dow website

Rtv1201
Momentive - RTV 106

Description

Momentive RTV106 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical.

RTV106 will bond to many clean surfaces without the aid of primers. These surfaces typically include many metals, glass, ceramic, silicone rubbers and some rigid plastics. For difficult-to-bond substrates, the use of a primer is suggested. Depending on the substrates involved, various primers are recommended for use with these sealants, specifically SS4004, SS4044 and SS4179.

This product is suited for a range of applications including sealing heating elements gasketing; electrical insulation and other critica l bonding and sealing applications where parts must perform at high temperatures

Product Benefits

Easy to use, one-component materialCures at room temperature and ambient humidityOffers self-adhesion propertiesLow temperature flexibilityHigh temperature performanceExcellent weatherability, ozone and chemical resistanceExcellent electrical insulation properties

Technical Properties

Uncured Consistency: PasteColour: RedTack-Free Time: 20 MinsCured Shore Hardness: 30 Shore AElongation: 400%Dielectric Strength: 20kv/ mm (500 v/mil)Operating Temperature: -60°C to +260°CIntermittent Temp: +315°C

Product Specifications

FDA ApprovedMilitary Specification: MIL-A-46106Boeing Specification: BAC5010Airbus Qualification: Level P3

Rtv106
Momentive - RTV 108

Description

Momentive RTV108 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical.

RTV108 will bond to many clean surfaces without the aid of primers. These surfaces typically include many metals, glass, ceramic, silicone rubbers and some rigid plastics. For difficult-to-bond substrates, the use of a primer is suggested. Depending on the substrates involved, various primers are recommended for use with these sealants, specifically SS4004, SS4044 and SS4179.

This product is suited for a range of applications including general purpose bonding; sealing; electrical insulation and creating formed-in-place gaskets.

Product Benefits

Easy to use, one-component materialCures at room temperature and ambient humidityOffers self-adhesion propertiesLow temperature flexibilityHigh temperature performanceExcellent weatherability, ozone and chemical resistanceExcellent electrical insulation properties

Technical Properties

Uncured Consistency: PasteColour: TranslucentTack-Free Time: 20 MinsCured Shore Hardness: 30 Shore AElongation: 450%Dielectric Strength: 20kv/ mm (500 v/mil)Operating Temperature: -60°C to +204°CIntermittent Temp: +260°C

Product Specifications

FDA ApprovedMilitary Specification: MIL-A-46106Boeing Specification: BAC5010Airbus Qualification: Level P3

Rtv108
Momentive - RTV 159

Description

RTV157 and RTV159 are one-component, ready-to-use, high strength silicone rubber adhesive sealants.
They cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature.
RTV159 sealant also provides high temperature performance. Both of these products release acetic acid
vapors as a by-product of cure.
RTV157 and RTV159 sealants are paste consistency products which can be applied to horizontal, vertical
and overhead surfaces in applications requiring high strength and temperature performance.
Since these adhesive sealants utilize a moisture cure system, they must not be used in thicknesses of
greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials
one-component, addition cure or two-component silicone rubber compounds are suggested.
These sealants were not designed for and should not be used for applications intended for permanent
implantation into the human body.
Key Features and Benefits
High strength
High temperature performance
Low temperature flexibility
One-component
Room temperature cure
General primerless adhesion
Excellent electrical insulation properties
Excellent weatherability, ozone, and chemical resistance

Rtv159
Elkem - CAF4

Description

CAF 4 DISPERSION is a one component silicone elastomer which cures at room temperature:
• Acetic
• Sprayable.
• Off-white

Caf4
Dowsil - DC4

Description

Uses of Dow Corning® 4 Electrical Insulating Compound include:

• Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections
• Waterproof electrical connections
• Electrical assemblies and terminals
• Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings
• Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations
• Lubrication for control and pressure plug valves

Dow website

Dow - DC 736

Description

Nonslumping sealant designed for sealing and bonding
applications exposed to temperatures as high as 315°C (600°F)

The high temperature properties of this sealant make it ideally suited for:
• Sealing and encapsulating heating elements in appliances
• Aerospace gasketing
• Moving oven belts
• Industrial ovens
• Bag filters on smoke stacks
• Other critical bonding, sealing, potting, encapsulating and protective coatings
where parts must perform at high temperatures

Dow website

Dow Corning 736 Silicones
61-360800 Blue Silicon Paste

Description

Type 61 colorants are smooth, workable pastes comprised of the highest quality pigments dispersed in a silicone vehicle – totally compatible with all silicone formulations.

Blue Silicon Paste
Wacker - Elastosil E41

Description

ELASTOSIL® E41 is a flowable, one-component silicone rubber with very good mechanical properties, which cures at room temperature under the influence of atmospheric moisture.

Elastosil E41
Zwaluw - Silicone NO Sanitary

Description

Zwaluw Silicone-NO is een veelzijdige neutrale siliconenkit voor sanitair, bouw-, beglazings- en gevelvoegen die onder invloed van de luchtvochtigheid uithardt tot een duurzaam elastisch rubber.

Zwaluw Silicone No Sanitary
Zwaluw - Silicone NM Sanitary & Natural Stone

Description

Zwaluw Silicone-NM is a plasticizer free neutral silicone sealant for sealing connection joints between natural stone and other strong absorbing substrates that reduces the risk of edge soiling and staining on the substrates.

Zwaluw Silicone Nm Sanitary Natural Stone
Zwaluw - Acryl W Seal and Fill

Description

Zwaluw Acryl-W is een hoogwaardige afdichtingskit op basis van acrylaatdispersie. Na het aanbrengen vormt het product een zacht plasto-elastisch rubber door verdamping van het water uit de kit.

Zwaluw Acryl W Seal And Fill
Zwaluw - Window Seal Plus

Description

Zwaluw Window Seal Plus is een beperkt overschilderbare, droog afmesbare, universele beglazingskit op basis van siliconen technologie die onder invloed van de luchtvochtigheid uithardt tot een duurzaam elastisch rubber.

Zwaluw Acryl W Seal And Fill
Zwaluw - Acryl Exterior Rain Resistant

Description

Acryl Exterior+ is a high quality acrylic sealant quickly water resistant after application. After application the product forms a soft plasto elastic rubber once the water evaporates from the sealant.

Zwaluw Acryl Exterior Rain Resistant
Pattex - CF 900

Description

Styrene-free Vinylester Resin Anchoring works in solid and hollow materials and places where expandable dowels cannot be used.
Cures underwater.

Vinylester Technology
Classical vinylester resins and the 2-component injection mortar made from them combine the thermal and mechanical properties of epoxy resins with the easy and fast processability of unsaturated polyester resins.

Pattex CF 900 which is based on styrene-free vinylester is characterized by a very high chemical resistance.

Pattex Cf 900
Pattex - 1 for all

Description

Pattex One for ALL High Tack is een montagekit met extra hoge aanvangshechting geschikt voor alle zware montageklussen in en rondom het huis. De lijm is geschikt voor alle materialen en alle omstandigheden.

Pattex 1 For All
Loctite - SI 5699

Description

LOCTITE® 5699™ is designed primarily for flange sealing with excellent oil resistance on rigid flange sealing for example on transmissions and cast metal housings.

Loctite Si 5699
Poly Service - Poy-Sil PS 81020 5kg

Description

PS 81020 is een scheurvaste giet- en strijkrubber, welke na menging met Harder 81020 bij kamertempratuur uithardt.
Toepassing: Het maken van flexibele mallen voor het afgieten van polyester, epoxy, polyurethanen, gips of was.

Poly Sil Ps 81020 5Kg
Wacker - RTV-S 691

Description

RTV-S 691 is a flowable, dual-part addition curing silicone rubber which can be vulcanised at room temperature. Due to its low outgassing rate and low temperature flexibility it is recommended especially for space applications.

Wacker Rtv S 691 A B
Momentive - RTV 31

Description

RTV31, silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base
compound and DBT (dibutyl tin dilaurate) as the standard curing agent. DBT is suitable for most applications, however other catalysts are available to facilitate deep section cure, faster cure and automated mixing.
RTV31, silicone rubber compounds differ primarily in viscosity in the uncured state.
Key Features and Benefits
Variable work times and cure rates by adjusting the amount and type of curing agent
Room temperature cure
Composition free of solvents and solvent odor
Excellent adhesion capabilities with primer
Excellent release properties
Retention of elastomeric properties at temperatures from -54°C (-65°F) up to 260°C (500°F) continuously, and up to 316°C (600°F) for short periods of time

Rtv 31
Dow Corning - RTV 3145

Description

High strength silicone adhesive/sealant
One-part
Non-sag
Room temperature cure
Neutral alkoxy cure system
Good adhesion to glass, ceramics, metals, silicone rubber and many plastics
High tear strength
Flexible rubber - protects against mechanical shock and thermal cycling stress at components
Stable and flexible from -50°C to +200°C (higher for grey version)
Excellent dielectric properties

Designed to provide long term bonding and to protect against moisture,
environmental attack, mechanical and thermal shock as well as vibration
especially where a high strength product is required.
Typical applications include: bonding of sensitive electronic components and
sub-assemblies.


Rtv 3145
TOP