Buy coatings? A selection of the types of coatings SECOA provides includes acrylic paints, aerosol spray paints, activators, adhesion promoters, corrosion preventatives, fillers, hardeners, inks and markings, paint removers, primers, thinners, top coat, surfacer, wash primers, conductive coatings and solvents in addition to many other speciality coatings and surface treatments. A small range of our products is shown below. Please contact us if you can't find your product. Our sales rep is happy to serve you with the product that you need.
MIL-PRF-85285 Types 1 and 2 is a two component high solids polyurethane topcoat with a maximum VOC of 2.8 lbs/gallon. QPD for both types 1 and 2. It is a general purpose exterior protective coating for metal surfaces.
This polyurethane is suitable for exterior application on aerospace and aircraft weapons systems and other applications. It is intended for use as a finish coat for military ground support equipment, aircraft, and marine equipment.
A one component, alkyd base, corrosion inhibiting
zinc chromate primer & Non chromate / Class C or N
TT-P-1757B Ty.I, Cl.C Zinc Chromate Primer is a
single component, zinc-chromate pigmented, low-moisture
sensitivity primer primarily intended for spray application on
surface treated aluminum or surface treated with pre- treatment
coatings MIL-C-8514C or DOD-P-15328D. This primer may be used
with or without top coating. When suitable thinned, this primer
may be used for dip or flow-coat application.
MIL-PRF-23377K Type 1 Class C2 is a two component high solids yellow epoxy primer with a maximum VOC of 2.8 lbs/gallon.
This two component VOC compliant, yellow epoxy polyamide primer meets MIL-PRF-23377 K , Type 1, Class C2 composition and performance specification. This product may be used as a primer for MIL-PRF-22750 and MIL-PRF-85285 topcoats.
CAAPCOAT FP-500 Color Matched Gloss Polyurethane Rain Erosion Coating is a two component room temperature curing polyurethane elastomer designed to protect aircraft radomes, antennas and leading edges from rain impact at high speed while providing color tailorability for camouflage or aesthetic purposes. CAAPCOAT FP-500 may be topcoated with CAAPCOAT FP-550 color matched topcoat if a lusterless finish is desired. Materials used are designed to provide superior resistance to humidity and fungus, while substantially reducing VOC and HAPS compounds. Most Federal Standard 595C gloss colors used by the aircraft industry or military are available.
CAAPCOAT FP-550 Color Matched Lusterless Polyurethane Rain Erosion Coating is a two component room temperature curing polyurethane elastomer designed to protect aircraft radomes, antennas and leading edges from rain impact at high speed while providing color tailorability for camouflage or aesthetic purposes. CAAPCOAT FP-550 is applied over CAAPCOAT FP-500 color matched basecoat. Most Federal Standard 595C lusterless colors used by the aircraft industry or military are available. Materials used are designed to provide superior resistance to humidity and fungus, while substantially reducing VOC and HAPs compounds.
Chromate-free epoxy top coat, water reducible with direct adhesion. The F69 top coat offers good corrosion
protection and excellent chemical resistance.
It is used to protect mountings and sealants, and as a corrosion resistant primer for certain structural parts.
Base F69
Hardener / Catalyst F69
Thinner Water (AIMS 09-00-003 Grade C)
Qualified in accordance with:
Airbus: AIMS 04-04-009, AIMS 04-04-018, AIMS 04-04-043, AIMS 04-04-047, ABP 4-2128, PQ10050-055-04
(blue), PQ10050-053-03 (grey), CML 16-021
Aircelle: HMRC0131A
Meets the following requirements:
AIPI 05-05-003
Waterborne one component acrylic spatula filler for surface repair of aircraft interior panels .
Excellent performance on honeycomb panels, polycarbonate , P.E.S., composites and most commonly used synthetic materials, as well as on metals. Specifically formulated to fill up general surface porosity and/or light scratches
Specifications:
- BAC 5322
- FAR 25.853 test a and d
- FOKKER RT1768 (M)
- MEP 10-074
- AIMS 04-30-001 ( Interplan 100SP Fine type B – different viscosity)
- Passes the OSU 65/65 requirements
Two-component polyurethane-based topcoat
Very good chemical and mechanical resistance
Very good resistance to weathering
Very good gloss and colour stability
IR reflection adjustable
For the final protective coating of military equipment
Approved in acc. with:
TL 8010-0002 class II type 7
MIL 46168
MIL-C-85285B
SP-J-513-C-0083 type I class A / class B
A two-component, hi-solids epoxy coating for spray and brush applications, furnished in a packaged kit and suitable for use under air pollution regulations. Formulated for the protection against solvents and chemicals on interior and exterior surfaces. It is low "VOC" and lead/chromate free. Available in Type I - Low VOC (High Solids); Type II - Low VOC (High Solids) and VOHAPS free; and Type III - Low VOC (High Solids), VOHAPS free, and DTM (Corrosion Inhibiting).
MIL-DTL-53039E, Type IV coatings are
single component moisture cure aliphatic
polyurethane chemical agent resistant
coatings (CARC). They conform to MIL-DTL-53039E
composition and performance
specifications. They can be effectively
decontaminated after exposure
to liquid chemical agents.
A non-slip walkway coating for the exterior of aircraft surfaces.
A-A-59166 Walk-Way Coating is a non-slip walkway compound coating for
use on walkways of exterior aircraft surfaces. Type II contains grit for
additional non-skid properties. For brushing and rolling application only.
BLUESIL PRIM PM 820 & PRIM PM 820 UVT are adhesion promoters for silicones
elastomers: CAF one-component and RTV-2 two-components curing at room
temperature, for LSR (Liquid Silicone Rubber), as well as heat curing rubbers (HCR),
on a large number of substrates.
The BLUESIL PRIM PM 820 UVT contains an UV marker to visualize areas where
primer has been applied using Ultra Violet light.
LOCTITE® SF 7649™ is used where increased cure speed of
LOCTITE® anaerobic products is required. It is especially
recommended for applications with passive metals or inert
surfaces and with large bond gaps. LOCTITE® SF 7649™ is
particularly recommended when prevailing temperature is low
(<15 °C).
SEEVENAX-Grundbeschichtung 113-24 is a chromate-free two-component primer based on epoxy resin which can be applied in a dry film thickness of 20-30 μm. With topcoats e.g. TL 8010-0002 this primer proves high corrosion resistance and very good chemical resistance.
acc. to TL 8010-0001 Klasse II Typ 4 and MIL-P-53022
44GN098 is a chrome-free, water reducible, chemically cured, two-component epoxy polyamide primer.
Corrosion inhibiting
Chemical and solvent resistant
Resistant to immersion in hydraulic fluids, lubricating oils, phosphate ester based hydraulic fluids and distilled water
44GN098 is a chrome-free, water reducible, chemically cured, two-component epoxy polyamide primer.
Corrosion inhibiting
Chemical and solvent resistant
Resistant to immersion in hydraulic fluids, lubricating oils, phosphate ester based hydraulic fluids and distilled water
High-performance coating of >93% pure zinc that electrochemically bonds with ferrous metals to form a galvanic cell. It actively fights rust and corrosion. Use as a touch-up for damaged galvanized coatings. Dries quickly. Outdoor protection: 1 - 2 years.
On threads, exposed edges, fasteners, conduit, strapping, welds, fencing, railings, grates, electrical poles, breaker panel housings, rain spouts, signs, doors, trailers, waste containers, catwalks, and guard rails.
A single component, moisture curing polyurethane coating for printed circuit assemblies. Contains fluorescent tracer to aid inspection under ultraviolet light. Qualified to MIL-I-46058C.
Hammerite metaallak is een decoratieve roestwerende metaallak. Stopt het roestproces en biedt een duurzame bescherming.
BONDERITE S-MA 522 is a peelable protective product, with a very high degree of resistance to chemical agents.
This product give covered parts excellent protection against the corrosive action of hot alkaline and acid solutions recommended for the chemical milling of aluminium, magnesium, steel and titanium.
Two-component polyurethane-based topcoat
Very good chemical and mechanical resistance
Very good resistance to weathering
Very good gloss and colour stability
IR reflection adjustable
For the final protective coating of military equipment
Approved in acc. with:
TL 8010-0002 class II type 7
MIL 46168
MIL-C-85285B
SP-J-513-C-0083 type I class A / class B
Colour: available in military colour shades, IR reflextion according to specification /
sample
Gloss: dull mat, mat
BONDERITE M-CR 1132 CHROMATE COATING PENS approved pen for applying the Class 1A chromate conversion coating for MIL-DTL-5541.Light metals
SS4155, and SS4179 primers are formulated for use with Momentive Performance Materials RTV silicone rubber adhesive sealants. Momentive Performance Materials one-component products offer primerless adhesion to many substrates. Primers are used to help promote adhesion to difficult-to-bond substrates. For most Momentive Performance Materials two-component products, a primer is required when an adhesive bond is needed between the silicone rubber compound and a non-silicone surface (see table below). All primers are one-component products requiring no mixing and are supplied ready-to-use as easily pourable solvent solutions.
Bolidt Coating 24039n is a 2 component coating for plastic floors.
Zeer slijtvaste lak speciaal ontwikkeld voor houten parketvloeren en
traptreden. Diaglass haalt de natuurlijke houttint mooi op, droogt
snel en is bestand tegen huishoudelijke chemicaliën. Diaglass is
verkrijgbaar in 3 verschillende glansgraden (mat, satijn en briljant).
Flexible two components polyurethane clear coat, for aircraft exteriors.
-Release Lacquer natural is a skin forming release agent made on a polyvinyl alcohol base dissolved in a mixture of ethanol/water. A glossy, tough PVA layer forms after drying
Chromated, water reducible, chemically cured
Corrosion inhibiting
Chemical and Solvent Resistant
Resistant to Hydraulic Fluids, Lubricating Oils, Phosphate Ester Based Hydraulic Fluids and Distilled water
3M™ AC-130 BoeGel is a sol-gen surface preparation for projects that involve adhesive bonding of steel, aluminum alloys and titanium. This product improves adhesion, which results from the chemical interaction between the metal, the AC-130-2 BoeGel and the primer.
BALVER ZINN SOLDER MASK is a temporary, peelable solder mask comprised of a thixotropic, synthetic acrylic latex designed to withstand fluxing, wave soldering and cleaning operations. Unlike natural latex mask, it contains no offensive ammonia and hence is non-corrosive to copper, gold, silver or pre-soldered surfaces. In addition, stability problems are averted. When applied, the product is opaque pink, and when cured, it becomes completely translucent red. Cured mask can be for masking conformal coatings. May be used in applications such as robotic pneumatic and hand. Approved by long term temperature tests at 330 °C . BALVER ZINN SOLDER MASK is also applicable for the lead free process.
Penetrating, water displacing, general purpose, corrosion inhibiting compound (CIC). Forms a soft, waxy film. Applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion. AV 25 can be used in all areas of the airframe on painted and unpainted surfaces. It is designed for the treatment of areas where a soft, lubricating film is required, for example pulleys, control cables and other movable components.
IS-213 is intended for use in the reduction of MIL-PRF-85285 Aircraft and Support Equipment Polyurethane Coatings.
Penetrating, water displacing, corrosion inhibiting compound (CIC). Forms an almost tack-free, waxy film. Range of Use: Applied as a coating to protect metals commonly used in airframe structures and in aerospace components from corrosion. AV 30 can be used in all areas of the airframe on painted and unpainted surfaces. AV 30 is a versatile CIC product. It combines good penetration properties with excellent corrosion inhibiting characteristics at low applied film weight.
N58479/T508 is a two component polyester based filler for direct application to metal and composite substrates, for filling of holes and surface imperfections.
-High viscosity
-Excellent sandability
-Ambient curing
-Long pot life enables filling of large areas using a single mix
Biglo Radiant is een 1 component daglichtverf op basis van acrylaathars waarbij de sterke reflectie wordt verkregen door de inval van ultra-violette stralen zoals die in daglicht voorkomen. Dit houdt in dat bij schemer de reflectie minder wordt en in het donker geen (door het ontbreken van daglicht) fluorescentie plaatsvindt.
Heresite B-31 baking phenolic coating is a high performance coating capable of providing protection in severe and chemically corrosive environments.
Loctite product 7400 is a solvent-based dark red marking ink for use on electronic equipment. The product dries quickly and has excellent adhesion to a range of materials. It is ideal for tamperproofing adjustment points or marking components to indicate they have been set or tested.
Surface Preparation - polyolefin primer. Ideal for difficult-to-bond plastics.
LOCTITE® SF 770 is a primer used to make polyolefin and other low-energy surfaces suitable for bonding with LOCTITE instant adhesives. The cured performance of LOCTITE® instant adhesives is ensured on such treated surfaces. It is only recommended for difficult-to-bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. LOCTITE SF 770 is not recommended in assemblies where high peel strength is required.
Chemically cured, two-component, PTFE filled polyurethane topcoat intended for use on exterior application on aircraft and aerospace equipment requiring a mar resistant surface.
Specification: FMS 1027D Type V
Color: FED STD 595C # 36320 Camouflage Gray
Chemically cured, two-component, PTFE filled polyurethane topcoat intended for use on exterior application on aircraft and aerospace equipment requiring a mar resistant surface.
Specification: FMS 1027D TYPE V
Color: FED STD 595 Color 36270 Camouflage Gray
PU88 matt camouflage topcoats are the C.A.R.C., conventional, ambient cured, acrylic-urethane topcoats of the A21 - F61 scheme for French Land based Defence; they are designed to be applied on epoxy or polyurethane primers, and allow exterior protection of military equipment against all specific military aggressions.
They are qualified with Celopox 2000SC to DAT C 8010X0003 specification or meet the technical requirements of this spec.
PU88 can be delivered in a full tange of colors with various Near-Infrared Reflectance properties.
Base 5555
Activator 0706/9000M
Thinner 0575/9000
Semi-Gloss topcoat
4080 is a single component, nitro-vinylic topcoat
Used for external protection of aircraft, 4080 is an ester oil resistant paint applicable over Metal Primer 6840B and Primer 4888 or over white matt.
STPA standard AIR 8104 – Identification sheet n°1000
IC DASSAULT
The topcoat meets the technical requirements of the standard MIL-L-19538 C
Two-pack filler paste based on unsaturated polyester resins and inert mineral extenders. The paste is easy to spread and allows to obtain both great thickness and thin layers. The sanding work is quick and easy, the sandpaper will not fill or clog. Recommended for all traditional car body work in which the dry sanding is used.
Super Koropon® 515X408 fluid resistant primer is a chemical and solvent resistant epoxy coating.
Compatible with PRC® sealants and Desothane® topcoats
Excellent adhesion and corrosion resistance
Excellent Skydrol® resistance
Service temperature -54°C to 177°C (-65°F to 350°F)
Super Koropon® 515X408 primer can be applied over clean, dry, intact aluminum and composite surfaces. Aluminum surfaces shall be treated with materials conforming to MIL-C-5541 or equivalent.
CA8311 is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and land based defense equipment.
CA8360 is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and land based defense equipment.
CA8321 is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and land based defense equipment.
High solids, low VOC
Chemical Agent Resistant Coating (C.A.R.C.)
Excellent UV resistance & long term durability
Excellent resistance to Skydrol® hydraulic fluid
Service temperature -55 to 150°C (-67°F to 302°F)
Can be used with PPG military selectively strippable scheme
CA8300 is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and land based defense equipment.
High solids, low VOC
Chemical Agent Resistant Coating (C.A.R.C.)
Excellent UV resistance & long term durability
Excellent resistance to skydrol hydraulic fluid
Service temperature -55 to 150°C (-67°F to 302°F)
Can be used with PPG military selectively strippable scheme
Also available in controlled military grades
Desoprime™ 7065 is a high solids, chromate free polyurethane primer designed for use over Desoprime™ CFWP 7530.
Corrosion inhibitive
Fast drying
Chromate free
Good chemical resistance
7521 is an air-drying, epoxy, chromate free primer designed for both exterior applications and the protection of interior and structural parts of aircraft.
7521 is suitable for application direct to pre-treated aluminium alloy and can be overcoated with conventional or high solid topcoats.
High solid, low VOC
Excellent adhesion & chemical resistance
Good flexibility
Corrosion resistance
PR143 is a two-pack, ambient curing, chromated epoxy primer developed for the internal and external protection of aircraft.
Ambient curing
Excellent resistance to phosphate ester hydraulic oils
Superior water resistance & adhesion properties
Excellent corrosion resistance
Also available in military grades
Grondverf als basis voor een kras- en huidvetbestendige binnenlak. Goede hechting en vulling.
De beste basis in combinatie met een Rubbol BL Rezisto aflak
Uitstekende hechting
Goede vulling
Hoge dekkracht
Als grondverf en voorlak voor hout, hard PVC en andere kunststoffen (met uitzondering van polyolefinen, zoals PE en PP), beton, pleisterwerk e.d. Binnen- en buitentoepassing. Ook toepasbaar op gereinigde en geschuurde alkydharsverflagen. Ideaal als basis voor een huidvet bestand verfsysteem; in gevallen waar huidvet het oude verfsysteem heeft aangetast, voorkomt deze grondverf dat het nieuwe verfsysteem vanaf de grondlaag al wordt aangetast. Ideaal voor onderhoud-, renovatie- en nieuwbouwtoepassing. Zeer geschikt als sneldrogende grondverf voor buiten.
PRESTO BLACK BST4 is a liquid brush-on blackener for all iron and non-stainless steels. Applied at room temperature by swab-on or spray techniques, the BST4 reacts quickly and produces a non-dimensional black finish in 30-90 seconds. The finish can be sealed with a protective oil and is suitable for use on precision tooling and machine components. Or, the black finish can be highlighted to produce a pleasing distressed or antique pewter type finish on decorative metalwork, architectural trim or hand-forged items.
Water thinnable epoxy polyamide primer
Anti corrosion adhesion primer, overcoatable with polyurethane paints.
Excellent resistance to de-ionised water.
Excellent fretting resistance
Two-Pack polyurethane coating
Aeronef radomes and engine parts (cones, blades, OGV)
Excellent erosion resistance to sand and water
Excellent electromagnetic transparancy
Good tropical heat resistance 70C
Resistance to aeronautical fluids
Low temprature resistance -50C
Primer without toluene for plastic and paint substrates. Undercoat as bonding surface for all BETASEAL and BETAMATE E products.
Gloss black epoxide sealing paint based on flexible resins for proofing elastomers against the action of intermittent contact with mineral and ester based lubricants, greases and ozone at temperatures < 60oC ( 140oF)
Apply in accordance with PS 5610 B or other spec. Will also be found on relevant drawings and Process specs detailing the fitting of de icer shoes
EC 96 is a two-pack, ambient curing, low VOC, epoxy finish possessing good adhesion and high chemical resistance. This combination of properties makes it an ideal topcoat to enhance the protection of either epoxy or polyurethane primers used on the internal structure of aircraft by providing an easily cleaned finishing coat which has high resistance to aircraft fluids, including phosphate ester hydraulic fluids. EC 96 is approved to the following specification: DEF STAN 80-161, MSRR9064
Apply Nycote 7-11 to metal surfaces that need protection from corrosive elements. The liquid formula can be easily applied by painting, spraying or dipping areas that need protection from aircraft fuels, oil, lubricants, phosphate ester hydraulic fluids, salt spray and water. Nycote 7-11 also provides excellent high impact, abrasion resistance, flexibility and toughness at temperatures of -70°F to +300°F (-57°C to +149°C). Nycote 7-11 has a six-month shelf life and the container can be resealed throughout. NSN: 8010-01-134-0415
Nycote product range:
Nyclean
Thinner I
Thinner II
7-11
88
All in multiple sizes available
SermeTel 249® is an aqueous inorganic metallic coating that may be matured at room temperature. The coating contains aluminum and zinc powder in an inorganic binder system. SermeTel 249 is useful for corrosion protection, medium high temperature cycling and oxidation resistance. The coating is supplied ready to use, requiring no additions. It can be applied by spray, brush or other suitable methods. In addition to ferrous alloys, SermeTel 249 can be applied to cellulosic materials, zinc, aluminum, copper, brass, bronze, ceramics, plastics, and other building materials. The coating can also be used as a touch up for damaged SermeTel basecoats such as SermeTel W®.
P580-3501/-3502/-3503/-3504 are high performance amine cured epoxy primers. They are high solids and fast
curing products with excellent adhesion properties and corrosion resistance over most common commercial
transport substrates. In ready-for-use mode, the VOC content of this product is lower than 540 g/l.
One-part
Flowable
Solvent-free room temperature cure
Neutral alkoxy cure system Good adhesion to glass, ceramics, metals, silicone rubber and many plastics
Stable and flexible from -50°C to +200°C (higher for grey version)
Translucent
Flexible rubber - protects against
mechanical shock and thermal
cycling stress at components
Excellent dielectric properties
Designed to provide long term coating against moisture and atmospheric contaminants especially where a solvent-free RTV product is needed.
Typical applications are: coating of cable terminations in electronic enclosures, connectors, oscillator crystals, printed circuit boards and thick film hybrids.
Clear one-component urethane type conformal coatings. Forms a highly flexible, durable film.
Insulates electrical/electronic equipment, seals out water and moisture and acts as a barrier for contaminants.
Kester 186, under MIL-F-14256, was QPL approved as Type RMA. Although the fluxing ability approaches that of Type RA flux, the flux
residue after soldering is non-corrosive and non-conductive. Kester 186 rosin flux has been developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux. This flux possess high thermal stability for soldering multi-layer assemblies which require a high preheat temperature. Exposure to high preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. There is no surface insulation resistance degradation caused by the flux residue. The use of a minimum of ionic activating agents and the inactive nature of the residue permits leaving the residue on circuit
board assemblies for many applications. The flux residue is also moisture and fungus resistant.
TT 32 is a single pack, pigmented acrylic resin lacquer which dries quickly by solvent evaporation to a matt finish.
TT 32 is approved to the following specifications:
AFS 1806
AFS 1096
Def Stan 80-214
TT 32 may be applied directly to epoxy primed surfaces. Alternatively, epoxy filler FR80 may be applied to the epoxy primer before application of TT 32.
ALEXIT-H/S Topcoat 411-77 is a high-gloss, high-solid paint based on polyurethane, especially developed for exterior applications. The top
coat offers high gloss and colour stability as well as resistance against chemical and mechanical influences.
DINITROL METALLIC is a significantly thixotropic corrosion preventive which provides long term resistance against rust and abrasion even under difficult conditions. When the solvents have evaporated, a tough, elastic, brown, waxy protective film remains on the sheet metal,
giving a high degree of protection. The film is also heat resistant and retains its adhesion to the plate at all usual repair and paint oven temperatures.
PR205 is a two pack strontium chromate pigmented epoxy primer, designed for the internal and external protection of aircraft.
Tectyl 891D, Class II is a solvent cutback, firm film, black asphaltic corrosion preventive compound. Provides long-term protection for metallic surfaces in indoor or outdoor exposure and during international shipments. Military specs MIL-C-16173E, Grade 1, for class II and MIL-P-116J, type P-1
CV116 is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification markings, labels and emblems.
The primer has been developed for an optimal adhesion in combination with these. The interaction / compatibility to OTTO sealants / adhesives has been tested and released by our technical department. For others, and not mentioned above OTTO product groups,
substrates or coatings we recommend preliminary tests. Do not apply primer and cleanprimer beyond the joint edges and adhesion surfaces to avoid contaminants / optical changings. The Primer contains toluene and is therefore subject to the Obligation to inform and to keep records according to the German Regulation of Chemical Interdiction (amongst others prohibition of self service).
For toluene-free alternatives please contact our technical department.
ALOCIT 28.15 EPOXY COATING FINISH
STANDARD GRADE (All temps above water - underwater below 17°C/63°F)
• Outstanding adhesion, on oily surfaces & underwater
• Environmentally friendly - solvent free and no heavy metals
• Proven protection against corrosion, including accelerated low water corrosion (ALWC)
• An inexpensive solution to problem coating needs
• Abrasion resistant
LD-62 Air dry fuel leak detector coatings in different colors, blue, yellow and red.
.946 liter can
Quick dry primer for non painted parts. Perfect for the automotive damage repair market.
100G21G Part 1 & 100V10Q Catalyst
MIL-C-46168D Ty. II #34031 Flat Green Polyurethane
Seymour Primer Coating Yellow Zinc Phosphate (more colors available).
All Seymour primers provide a high quality, fast drying surface that provides excellent adhesion for a finishing coat with indoor/outdoor durability. Heat resistant up to 250-Degree F. As a responsible corporate citizen, Seymour of Sycamore is thoroughly committed to protecting the natural environment and ensuring the well-being of our employees. This means not only providing a safe, clean and healthy workplace, but also fulfilling our legal and social responsibilities within the community. Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers. Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
For the last 20 years it has been used by leading aircraft and space manufacturers for general purpose marking. In space applications, the out-gassing characteristics are extremely low.
A faster drying Lotoxane® variant which evaporates 15 times faster than standard Lotoxane®.
TRESTJERNER BETONGOLJE is een transparante, watergedragen acryldispersie voor betonnen oppervlakken, poreuze plavuizen en baksteen. Het vermindert de vorming van stof en vergemakkelijkt het reinigen. TRESTJERNER BETONGOLJE heeft een goede hechting,droogt snel, vergeeld niet en is eenvoudig aan te brengen. Let op: dit product kan niet aangebracht over oude OXAN OLIE. Hiervoor adviseren wij SCANO VLOEROLIE.
