Buy Lubricants? The purpose of a lubricant is to; reduce friction, prevent corrosion, keep moving parts apart, transfer heat, remove contaminants and debris, transmit power, protect against wear, seal for gases, stop the risk of smoke and fire damage to objects, and to prevent rust.
Secoa bv is an official distributor of Sandstrom Coating Technologies in Europe. One of the main products is the 28A Solid Dry Film Lubricant Clear MIL-PRF-46147D, which is available in a 16 oz Aerosol can.
Superior lubrication, exceptional corrosion protection and the latest technology in waterborne and lead-free products. Our dry film lubricants are trusted by engineers for all sorts of applications. We offer commercial dry film lubricants to fit a variety of performance needs. When performance matters most, our customers count on dry film lubricants from Sandstrom.
A small range of our products are shown below. Please contact us if you can't find your product. Our sales rep is happy to serve you with the product that you need.
BONDERITE L-GP D 148A ACHESON is a PTFE based varnish developing a dry and lubricating coating after curing. BONDERITE L-GP D 148A ACHESON forms a smooth and dry lubricant film. BONDERITE L-GP D 148A ACHESON is a 2 compounds material used in combination with a hardener (BONDERITE S-OT DURCISSEUR/ BONDERITE S-OT AH 1 ACHESON).
Air-curing dry lubricant
For metal/metal combinations with slow to medium fast movements and high
Suitable for the permanent lubrication of highly stressed sliding guides with
low sliding speeds, oscillating movements or intermittent operation.
Improving the running-in process and for lubrication under high vacuum and
at extreme temperatures.
Used successfully for cylinder-head bolts, toaster guides, car mirror
adjustment mechanisms, high voltage switches, for the running-in of highly
stressed gear wheel.
Emergency lubricant for parts of the rotor head of wind energy installations
and for groove-free cold extrusion of steel.
Molykote 33 Extreme Low Temperature Bearing Grease
Dry Film Lubricant
DFL is a white, dry-film lubricant, for use where mineral oils or silicones are not suitable. It is also suitable for
use as an anti-stick and mould release agent or where products of the highest purity are required. The film will
not contaminate, migrate or pick up dust and dirt particles.
• Dry film lubricant; clean and non-oily
• Suitable for use on wood, plastic, fibre, metal, glass, etc.; testing advised
• Water repellent and chemically inert; suitable for a wide number of applications
• This product conforms with MIL-L-60326 (MU & MU Amendment 1)
ROCOL® PX-28 is military grade corrosion preventative for the preservation and corrosion inhibition of the interior surfaces of hollow sections of automotive and vehicle underbodies, certain artillery components bare metal and over certain paint systems.
ROCOL PX-28 is based on petroleum materials dispersed in hydrocarbon solvents. PX-28 does not contain halogenated solvents.
The PX-28 specification includes tests for freedom from corrosive effects, water displacing properties and resistance to solvent washing.
These greases are especially useful in vacuum and other systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, and solvents is required. Each grease is suited for different operating environment temperatures. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.
|These greases are suitable in applications including small and large diameter ball, roller, needle, and plain bearings, electrical contacts, threads, valves, gears, contacts, splines, ball screws, and screw actuators. It is compatible with most elastomers and plastic seals, gaskets and O-rings.|
Air dry solid film lubricant with an epoxy system. Qualifies to MIL-L-23398B.
A soft, lithium soap thickened, medium viscosity, phenylmethyl silicone
grease intended for light to moderately loaded bearings and instruments
operating at very low temperatures where little torque is available.
Perma-Slik RMAC is a MoS2 based solid film lubricant with a moisture-reacting, air dry organo-metallic
binder system. This coating provides very good wear life, thermal stability and performs best in higher load
carrying applications, and meets the requirements of SAE AS1701 Class V. Generally, this coating will dry to
the touch in less than 5 minutes. Ideal for field applications where extensive pretreatments are not practical.
The binder in this coating is not compatible with water and caution should be taken to insure no water is during
NYCO 65 VASELINE is a stiff, rather tacky petrolatum (heavy mineral
paraffin wax), with a melting point in the range 45 to 65°C. It is not
agressive to any metal or alloy.
NYCO 4224 is micronised graphite for aerospace use. NYCO 4224 is used as anti-seize compound for the assembly of components exposed to high temperature, as well as dry-film lubricant. It is also used in some graphited oils and greases.
Nyco Grease GN 22 is a NLGI 2, clay-thickened grease, based on a synthetic hydrocarbon oil with a viscosity of 7 cSt at 100°C. It is inhibited against corrosion, oxidation and contains anti-wear/extreme pressure additives.
It can be used from -65 to +177°C.
Airframe multipurpose grease (doors, flaps, slaps, landing gear, THS, …) of most civil and military aircrafts and helicopters
Wheel bearings of most of civil and military aircrafts and helicopters
Main and tail rotor of helicopter
BONDERITE S-OT DURCISSEUR ACHESON is the second
component for use in certain 2-component Henkel
As its use is integral to these other products, please consult
the related data sheet for end use properties and application
BONDERITE L-GP D 148A ACHESON is a PTFE based
varnish developing a dry and lubricating coating after curing.
BONDERITE L-GP D 148A ACHESON forms a smooth and
dry lubricant film.
BONDERITE L-GP D 148A ACHESON is a 2 compounds
material used in combination with a hardener (BONDERITE
S-OT DURCISSEUR/ BONDERITE S-OT AH 1 ACHESON).
ROCOL® MTLM Assembly & Running In Paste is a very high content molybdenum disulphide paste. It is designed to give a tough, wear resisting, greasy film which provides anti-seize protection, eases assembly and provides complete protection during the critical start up and running in periods.
Ideal for assembling plain bearings, pins, slides and gears etc.
ROCOL MTLM Assembly & Running In Paste is also suitable for the lubrication of valves and other slow moving parts under high loads.
ROCOL® AEROSPEC 100 is a high performance, low temperature, semi-fluid aerospace grease designed to meet the demanding requirements of today’s aerospace industry.
It gives outstanding operational performance and is particularly suited to extreme low temperatures.
ROCOL AEROSPEC 100 has been developed for the long term lubrication of rotary actuators and gearbox drives. In particular it was developed for the Airbus high lift system rotary actuator gearboxes.
Bolidt Bekleding PU/SH bestaat uit twee componenten op basis van polyurethaanharsen. Kort voor gebruik moeten de beide componenten tot een goed homogene massa worden gemengd.
GRAPHITE AND TECHNICAL PETROLATUM ANTISEIZE COMPOUND
ROYCO 44 is a heavy-duty antiseize compound developed for use on aircraft engine spark plugs, igniters, and threaded fasteners and fittings. ROYCO 44 has a consistency similar to modelling clay and is black in color.
CONOSTAN® is the original source of D-Series Standards. More than 35 years ago, the U.S. Department of Defense’s Spectrometric Oil Analysis Program Standards Committee required standards for its wear metals analysis programs. With no reliable commercial source of metals in oil standards, the CONOSTAN® research team set to work in developing a reliable standard. The result was CONOSTAN®’s uniquely superior sulfonate chemistry which was adopted by the Department of Defense for its D-Series Standards.
As with all CONOSTAN® products, the D-Series of standards are extremely stable and accurate.
Now available in Original and MIL-DTL-85694-compliant (JOAP) formulations! Returning CONOSTAN® D Series users should select from the CONOSTAN® original line of standards, while JOAP participants can now choose from our MIL-DTL-85694-compliant line.
Nyco Grease GN HC is grease based on a synthetic oil non miscible with hydrocarbons and/or polar solvents thickened with a lithium soap.
Nyco Grease GN HC is an aircraft grease designed to lubricate and seal plug valves and all other components exposed to jet fuel in aircraft systems. It exhibits a strong resistance to wash-out by hydrocarbons as well as solvents. Nyco Grease GN HC is also used as sealing compound for valves conveying hot crude oil or natural gas in the Oil and Gas industry. It is not normally used in bearings because of its extreme tackiness and adherence to metal surfaces.
RENOLIT ARMNA G4789 GREASE was developed in conjunction with Airbus Industrie, Liebherr Aerotechnik, Lucas Aerospace Engineering and the Ministry of Defence. It is designed to operate in the harsh conditions and low temperatures encountered in aircraft slat and flap actuators.
Specially developed for the lubrication of aircraft slat and flap actuators.
RENOLIT ARMNA G4789 GREASE is also ideally suited to the lubrication of ballscrews.
• Multi-purpose grease with calcium sulphonate base
• Broad operating temperature range (-18oC to 250oC)
• Meets or excess the specifications of NLGI GC-LB classification
• Reduces friction caused by asperity (metal to metal contact).
• Out performs traditional greases with its superior anti wear and high load carrying capabilities
• Outstanding shear stability, minimizing lubrication requirements
• Exceptional water wash resistance and rust and corrosion inhibition
• High extreme pressure lubricating film – up to 1.4 GPa (200,000 psi)
• Stays where it is applied and does not separate while in use
• Superb lubricating grease for all types of bearings, pins and bushings, king pins, valves and many other applications in marine, gricultural, industrial, pulp and paper, and mobile equipment
AERO-KROIL PENETRATING OIL
AeroKroil loosen frozen metal parts with ease. It is an an industry proven penetrating oil that has no equal It quickly loosens rusted nuts and bolts, frees frozens shafts, pulleys, and other parts. Aero Kroil penetrates into microscopic pores and cracks where it dissolves rust, lubricates, cleans and helps prevent further rust and corrosion by displacing moisture.
AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties.
BONDERITE S-FN T-502 ACHESON (known as DAG T-502) is a combination of specialty processed carbon particles
in a fluoroelastomer resin system designed to provide high resistance values. In its cured form, it exhibits both high and
low temperature flexibility and moisture resistance. These benefits, when coupled with ease of application and long shelf
life, make the product adaptable to a wide variety of uses. This product may also be mixed with other Dag® products to
provide a wide resistance range.
Krytox® 143 series oils are clear, colorless, fluorinated
synthetic oils that are nonreactive, nonflammable,
safe in chemical and oxygen service, and
are long-lasting. Krytox® is a perfluoropolyether
(PFPE)—also called perfluoroalkylether (PFAE)
or perfluoropolyalkylether (PFPAE)—with the
following chemical structure:
CF3 where n = 10–60
The polymer chain is completely saturated and
contains only carbon, oxygen, and fluorine. On a
weight basis, a typical Krytox® oil contains 21.6%
carbon, 9.4% oxygen, and 69.0% fluorine.
All standard grades of grease are thickened with
Krytox® 2000 polytetrafluoroethylene PTFE, whose
formula is (CF2-CF2)n. This special high efficiency
thickener has a melting point of 325°C (617°F) and
has low molecular weight and submicron (0.2 m)
particle size for higher performance in bearings.
Krytox® 240 series greases are white buttery greases
with all of the same properties as the 143 series oils
that they are made from, but they are in grease form.
Krytox® 250 series EP greases are black greases
that contain molybdenum disulfide added as an
extreme pressure additive for highly loaded gears
Krytox® 283 series anticorrosion greases are white
greases that contain sodium nitrite. These grades
provide rust protection at ambient temperatures,
corrosion protection at high temperatures, and
Emkarate RL 68H is an ISO VG 68 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-Conditioning compressors using HFC refrigerants. This product provides effective wear protection for steel and aluminium
surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill. The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate RL 68H over a wide
operating temperature range.
Esnalube 382 is thermally cured with a low VOC for safer use. This MoS2 based solid film lubricant uses a silicate binder system. This special coating has anti-galling and anti-seize properties, good chemical resistance and a low coefficient of friction, making it ideal for virtually all types of fasteners, specialty nuts and washers, threaded connectors and disconnects and engine fasteners. It has excellent thermal stability and performs well over a wide range of loads.
High performance grease with solid lubricants for metal/metal combinations involving slow to fast movements, particularly
with medium to high loads.
Rapidly penetrates and lubricates rusted or seized components freeing them for easy dismantling.
Sandstrom HI-T 650 Solid Film Lubricant is a lacquer-like coating containing molybdenum disulfide and corrosioninhibiting pigments with a silicone vehicle. It is a specialized product designed to prevent galling and provide long wear life at high termperatures (5000 F to 7500
F) exceeding the operational ranges of Sandstrom 9A and 27A. Higher pigment loading protects all metals from galling, fretting, and seizing. This solid film lubricant exhibits extremely low friction and anti-galling characteristics at loads in excess of 100,000 psi. It may be applied by spray or dip.
Fuchs 762 delivers optimum sealing-efficiency in high-temperature environments. In fact, maximum sealing is attained within the temperature range of 550ºC to 760ºC. However, depending on the characteristics of the joint faces involved, a satisfactory performance can be achieved over a wider temperature range. For example, the compound is known to be effective from 200ºC to 800ºC in the case of rigid joint faces of good surface finish, which are free from distortion and differential movement at the operating temperatures.
Sandstrom 28A Solid Film Lubricant is a thermoplastic coating containing molybdenum disulfide and corrosion inhibiting pigments. This air drying material prevents corrosion, galling, seizing and fretting. It is a low-friction coating that exhibits long wear life when operated at -320°F to +300°F under loads exceeding 100,000 psi. Sandstrom 28A should be applied where baking with the longer wearing, heat cured #099, Sandstrom 9A or LC-300 is not desirable or practical. Once 28A has been applied to a properly prepared surface and allowed to cure, it is virtually unaffected by atmospheric and fretting corrosion, acids, oils and degreasers. Sandstrom 28A can be applied to all metallic and non-metallic surfaces by spray application.
Lubrication for control and pressure plug valves, water softener and faucet valves; Sealant for vacuum and pressure systems; Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections; Chemical barrier coating; Rubber and plastic O-rings, gaskets and seals.
Versilube® G321 is a soapthickened, dimethyl-diphenyl polysiloxane based grease. Formulated to conform with the specifications outlined in the commercial item description (CID) A-A-59173 Type II, Versilube G321 resists oxidation and degradation even under extreme conditions.
A highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.
Nycoprotec 8188 is a 3 cSt oil at 100°C and is made of neopolyol esters, anti-oxydant, anti-wear and corrosion inhibitors.
Nycoprotec 8188 is designed to provide protection against corrosion in gas turbine engine lubrication system during storage. Due to its chemical nature and characteristics very close from that of turbine oils, it is not required to flush the lubrication system prior to filling with the turbine oil for the operation of the gas turbine. It is compatible with turbine oils complying with MIL-PRF-7808, MIL-PRF-23699 and DoD-PRF-85734 specifications.
AeroShell Turbine Oil 560 in a US quart can, is a third-generation 5-centistoke synthetic hindered ester lubrication oil. Formulated to cope with demanding operating conditions, ASTO 560 has consistently delivered the right balance of performance and cost efficiency to the global aviation industry.
Approved MIL-PRF-23699G Grade HTS, Approved SAE AS5780B Grade SPC. Equivalent DEFSTAN 91-101 and DCSEA 299/A