Specialty Products

Special Aerospace Related Products

Within our portfolio of over thousands of products, inevitably, some items don't fit naturally within a specific category - we call these specialties. SECOA offers a number of Specialty Products to fulfil our customer requirements. Suchs as:
- Repairkits
- Lifejackets
- Wax
- Composites
- Leak Detectors
- Wax Pen
- Fat Markers
- Tire Repair Kits
- DPD 3 tabs

If you have an enquiry for products that aren’t currently listed below, please do not hesitate to contact our Customer Service where one of our sales team will be happy to assist you.

Sealant Mixers | Foam | BMS8-79 | Dispensers | Retainers | Semco | Leak Detectors | Films | Fibers | Composites | Rain Away Windshield Repellant | MIL-DTL | Airtech | Kester | Coating Remover | Zip-Patch | Dykem Cross Check

BUY SPECIALTY PRODUCTS FOR THE AVIATION MARKET

Hylomar - Aerograde PL32

Description

Hylomar Aero Grade is a highly engineered, polyester-urethane based non-setting and non-hardening
gasketing compound, for use in the aeronautical industry. Hylomar Aerograde was developed in
conjunction with Rolls Royce - Aerospace Division for sealing joints in jet turbine engines. Hylomar
Aero Grade can operate at temperatures from approximately –50°C to + 250°C.

Click here for details

Aerograde
Tectyl products

Description

Tectyl 900:

Premium oil based corrosion preventive compound.
TECTYL 900 is a solvent cutback, water displacing, low viscosity lubricating oil and corrosion preventive compound.
TECTYL 900 meets Federal Specification MIL-PRF-32033, QPL Reference Number LP-7050.
TECTYL 900 provides protection to ferrous and non-ferrous industrial parts during storage and covered transit.

Tectyl 283:

Premium water displacing, oil based, corrosion preventive compound.
TECTYL 283-S-17 is a solvent cutback, water displacing, oil based corrosion preventive compound, lubricant and penetrant. The cured film is an ultralight, transparent, non-staining oil.
TECTYL 283-S-17 is used to protect industrial parts during long-term indoor or covered storage, and during domestic shipment.

Tectyl 802A:

TECTYL 802A is a lubricating oil and corrosion preventive compound. TECTYL 802A is approved under Military Specifications MIL-L-3150E, (superseded by Mil-PRF-3150D) QPL Reference Number L-6581. It is used to protect transportation equipment assemblies.

Tectyl 511M:

TECTYL 511M, Class I is a solvent cutback, water displacing corrosion preventive compound. The semi-firm film is oily, light amber, and translucent. TECTYL 511M, Class I is approved under Military Specifications MIL-PRF-16173E, Grade 5, for Class I; MIL-C-23411A, Type II; and MIL-P-116J, Type P-21. TECTYL 511M, Class I is designed to protect ferrous and non-ferrous industrial parts and transportation components during covered shipment and inside storage.

Tectyl 437D:

Tectyl 437D is a hot application corrosion preventive compound which provides an effective barrier against atmospheric corrosion. The film is semi-firm, tan in color, and opaque. Tectyl 437D is covered under Military Specification MIL-C-11796C, Class 3, QPL Reference Number M-6154.

Click here for details

Tectyl Coatings
Dykem Cross Check (formely known as torque seal F900)

Description

Tamper Proof Torque Mark

Dykem Cross Check (formely known as torque seal F900)

Highly visible fluorescent color paste that dries to a hard brittle film. Mark will be easily broken if parts are tampered with or become loose. Provides a convenient visual method for identification of vibratory loosening or tampering on nuts, bolts, fasteners and assemblies. Easily detect when torque has changed. Provides warranty protection against tampering. Highly visible under ambient light and fluorescent under UV light. Excellent adhesion to metal and other substrates.

Safe on most surfaces. Product may darken in color at elevated temperatures. Surface tests should be run to determine compatibility prior to use.

Click here for details

Dykem Cross Check
BMS8-79 Class 4 gr
Bose-X Coatings - Vernelec

Description

Protection varnish for printed circuits and components.

Click here for details

Vernelec
Chemetall products

Description

Products such as:
- Ardrox 1823
- Ardrox 9702
- MC 780 C / D

Click here for details

Chemetall Products
Sealant Mixers, Accessories en Parts

Description

We sell numerous mixers and parts such as:
P4-A NV Automatic Mixer
MC Injection Mixer (RAL 7044 / RAL 5012)
Techkit Mixer TS6500 CIM-6
Semco Model 285-E Semkit Semi Automatic Mixer 234535
388 Mixer assembly 2,5:6 8 FL OZ CE marked with guard 221269UE

Click here for details

Semco Mixer
3M - A 7706 film

Description

3M™ Exterior Aircraft Graphic Film A7706
For Unprinted, Screen Printing and UV Inkjet Printing Only

Click here for details

7706
Parker - Chobond 1085 & 1086

Description

Parker Chomerics CHO-BOND primers 1085
and 1086 are air-drying liquid coatings used
to improve the adhesion of Parker Chomerics
CHO-BOND conductive silicone compounds
to metal and other non-silicone substrates.
The primers are moisture reactive and
clear in color. CHO-BOND 1085 primer is
formulated to achieve maximum adhesion
on non-silicone substrates for CHO-BOND
1029 adhesive. CHO-BOND 1086 primer
is formulated for use with CHO-BOND
1016,1030, 1035, 1038, 1075 electrically
conductive adhesives/sealants and CHOTHERM®
1641 thermal compound.

Click here for details

Chobond 1085
Dispensers & Guns & Retainers

Description

Description & Part Number
1 oz. Plastic (30 cc) 231556
2.5 oz. Plastic (65 cc) 221825
2.5 oz. Metal 221824
6 oz. Plastic (170 cc) 221828
6 oz. Metal 221830
8 oz. Metal (230 cc) 221832
12 oz. Metal (340 cc) 221836
1/10 gallon Plastic (310 cc) 230273
20 oz. Metal (610 cc) 230274
32 oz. Metal (950 cc) 234054

The Semco® model 850 gun is a hand-operated, high quality dispensing gun designed to accept Semco® disposable
cartridges or Semkit® packages.
It is excellent for the “in-field” application of sealants, adhesives, and other materials. The ratchet handle is made of
metal for tough, durable, long-term use. A threaded retainer provides a tight fit into the ratchet handle, permitting
uninterrupted operation. It also allows for the quick and easy replacement of cartridges. Custom size retainers
accommodate Semco® 1, 2.5, 6, 8, 12, 20, 32 oz., and 1/10 gallon disposable cartridges. The retainers are available in
metal or plastic.


Retainer TBV 250 / 850
Sealant Gun 250 / 850
Polystop Gun Plastic
Handle Assembly Gun
EPX Hand Gun Pistol
B-Nut Assembly Gun



Click here for details

Semco 850 Gun
Semco - Repairkits

Description

Alodine magnesium treatment kit

Window repairkit

Tire repairkit

Click here for details

Repairkit
Life Jackets

Description

Lifejackets

Click here for details

Lifejackets
Stoner - Honey Wax

Description

Honey Wax® 100 is a pure, carnauba paste wax containing no silicones or fi llers. It is designed for the composite fabricator who requires a very high quality paste wax mold release agent.

Honey Wax® 100 is an excellent mold release where purity, non-staining and a hard releasing fi lm are important. Although application is somewhat more exacting than for processed waxes, the residual fi lm is more durable and resistant to abrasion. It will readily accept PVA without fi sh-eyeing. Honey Wax® 100 will also withstand higher temperatures than most processed waxes which can be critical for high exotherm resins. Due to the nature of its components and its ability to provide a hard, durable, waxy fi lm, Honey Wax® 100 is highly recommended when breaking in new molds or plugs.

Click here for details

Honeywax
Composites & fibers

Description

Composites & fibers

Click here for details

Composites
Rocol - Leak Detectors

Description

ROCOL® LEAK DETECTOR Spray is a specially
formulated fluid designed specifically to identify even
the smallest, positive pressure, gaseous leak on
plastic and metallic pipework and fittings.
ROCOL LEAK DETECTOR Spray leaves a thin
uniform film of surface-active agents that accurately
identify any leakage or bleeding of joints.

Click here for details

Rocol
DPD 3 Tabs

Description

Chlorine test tablets

Click here for details

Dpd 3 Tabs
Huntsman - Rencast FC 52

Description

No description available

Click here for details

Rencast Fc 52 Specialty
Huntsman - Rencast FC 52-53

Description

No description available

Click here for details

Rencast Fc 52 53 Specialty
Akrofire - Speed patch 848 & 888

Description

No description available

Click here for details

Speed Patch 848 And 888 Specialty
Bayonet with sensing cam

Description

Bayonet with sensing cam 3916a-A

Click here for details

Bayonet With Sensing Cam
Dr Weigert - Neodisher CMP

Description

Verwijdert kalk en andere in zuur oplosbare afzettingen in koffie- en espressomachines en waterkokers.

Click here for details

Neodisher Cmp
PPG - Sealant Gun + Hose

Description

No description available

Click here for details

Sealant Gun Hose
Rain Away Windshield Rain Repellant

Description

Rain Away® will provide continuous performance for prolonged periods under the most severe service conditions.

Click here for details

Rain Away Windshield Rain Repellant
Lord - Chemlok 7701

Description

LORD Chemlok® 7701 surface treatment is a solventbased surface treatment for use on various vulcanized and thermoplastic polymeric materials. Chemlok 7701 surface treatment chemically alters the surface of the rubber, making it more receptive to bonding. Chemlok 7701 surface treatment is used in conjunction with a broad range of LORD adhesives, including epoxy and urethane adhesives, for bonding cured rubber. It improves adhesion to a variety of cured and thermoplastic polymeric materials, including natural rubber, synthetic polyisoprene, SBR, butyl, polybutadiene, neoprene, EPDM, nitrile, polyurethane, styrene-butadiene block copolymers, styrene isoprene rubbers and polyvinyl chloride.

Click here for details

Lord 7701 Specialty
Enthone - M-Series

Description

M-Series inks are permanent, two component, epoxy-based marking inks. They may be used with a selection of
catalysts which cure at elevated and/or room temperatures. When properly applied and cured, M-Series inks have
excellent adhesion to glass, metal and thermosetting plastics. They have excellent chemical and thermal
resistance properties.
M-Series marking inks are used in the electronic, aerospace, automotive, appliance and decorative packaging
industries. Uses include the permanent marking of semiconductor components, printed circuit boards, connectors,
dials, nameplates, panels, chassis, glass and thermoplastics.

Click here for details

Enthone M0 N Black Specialty
Toupret - Holz-U

Description

STOPVERF voor enkelvoudige beglazing en voor het vullen van kleine gaatjes in hout, binnen en buiten, manueel toe te passen.

Click here for details

Toupret Holz U Specialty
Swift Hardener 9503

Description

No description available

Click here for details

Swift Hardener 9503
Magnaflux - Soundsafe Ultrasound Couplant

Description

Soundsafe® is a high-performance, general-purpose ultrasonic couplant for flaw detection and sizing, thickness gauging, flow metering and acoustic emission testing.

This medium viscosity gel couplant is well known for its outstanding performance, excellent corrosion protection, thixotropic properties and comprehensive range of specifications and approvals.

Soundsafe is Pratt & Whitney approved and meets nuclear grade specifications for halogen and sulfur

Click here for details

Soundsafe
Owens Corning - P316-17C Glass Fiber

Description

P316 chopped strands are made from E-glass continuous filaments
treated with a polyester-compatible size. They are particularly
suitable for producing compounds intended for either compression
or injection moulding in the production of thermoset composites.

Click here for details

P316 17 C 20 Kg
Teepol - Multi Purpose Detergent

Description

No description available

Click here for details

Teepol Multi Purpose Detergent
Bostik - Kneading Compound

Description

No Description available

Click here for details

Bostik Kneading Compound
Ethyl Methyl Ketone

Description

No description available

Click here for details

Ethyl Methyl Ketone
Sherlock Gas and Air leak detector

Description

Sherlock Type I oxygen and compressed gas leak detector is specially formulated to find leaks quickly! Sherlock leak detector is a neutral solution that can be effectively used to leak-test tanks, lines and cylinders that carry pure oxygen. They can also be used to test anything else that can be tested for leaks with gas or air pressure, such as pneumatic systems and fuel tanks.

This MIL-PRF-25567E leak detector does not contain grease, oil or any other substance that, when combined with pure oxygen, would be explosive or flammable. It's rigorously tested and approved by commercial and government laboratories, and can be used from +35 degrees to 160 degrees Fahrenheit. It cleanly dries and leaves no greasy residue. See the Sherlock leak detector MSDS for safety information, which can be found on each product page.

Sherlock T1-8S-24 has a 1 Year Shelf Life from the date of manufacture.

Click here for details

Sherlock Gas And Air Leak Detector Type I
Gloria 410 T High Performance Sprayer Profiline

Description

High-performance sprayer for special applications - oil-proof version

Click here for details

Gloria 410 T High Performance Sprayer Profiline
Shell - Special Boiling Point Solvents

Description

No description available

Click here for details

Kookpuntbenzine 7 6Kg
Kester - 1544 Soldering Flux

Description

Kester 1544 Activated Rosin Liquid Flux is a homogeneous solution of high quality, purified Grade WW rosin blended into an alcohol solvent system. A very effective activating agent has been added to provide superior fluxing ability. 1544 is a liquid equivalent of Kester 44 Activated Rosin Core Solder. The desired flux activity and the amount of rosin residue are determined by the concentration (solids percentage) of the flux.1544 has been developed for fluxing applications where non-activated and mildly activated rosin fluxes are too inactive to remove metal oxides, where proper and complete residue removal of potentially corrosive water-soluble organic acid flux is not possible, and where soldering of electronic assemblies requires instant wetting and excellent capillary flow. 1544 can be used for solder coating or tinning bare leads.

Click here for details

Kester 1544 Soldering Flux
Sprayon - MR 311

Description

Sprayon MR 311 Dry Film Release Agent contains fluoropolymer, which provides an extremely thin, dry film that does not transfer to finished parts. Allows multiple releases per application and is compatible with most moldable resins and elastomeric compounds, as well as delicate urethanes. Will not interfere with post-finishing operations.

Click here for details

Sprayon Mr 311
So-Sure Skilcraft

Description

For Temporary Protection Of Non-Moving Metal Parts Not Requiring A Lubricated Surface Such As Fasteners, Seams, Access Panels, Points, Unpainted Metal Surfaces Or Where Paint Is Cracked Or Damaged

Click here for details

So Sure
Dow Corning - Xiameter RTV 3000 F Catalyst & RTV3110 Base

Description

Dow Corning XIAMETER® RTV-3110 Base is easily mixed and poured, cures at room temperature, gives accurate reproduction of masters for mold making with primer, provides wide service temperature ranges and absorbs mechanical shock and vibration. Base only. 453 g Pail.
Dow Corning XIAMETER® RTV-3000 F Catalyst is easily mixed and poured, cures at room temperature, gives accurate reproduction of masters for mold making with primer, provide wide service temperature ranges and absorbs mechanical shock and vibration. Catalyst only. 45 g Tube.

Click here for details

Xiameter Rtv 3000 Cat Rtv3110 Base
Red hand scrappers

Description

No description available

Click here for details

Hand Scrapers
Threebond 1132

Description

Three Bond 1132 is a one componment anaerobic resin which cures in absence of air, and confined between metal surfaces.

Click here for details

Three Bond 1132
EC - Pink nozzles

Description

No description available

Click here for details

Pink Nozzles
Primaire 1003

Description

No description available

Click here for details

Primaire 1003
Aircraft Coating Remover SPC905

Description

No description available

Click here for details

Aircraft Coating Remover Spc905
Deoxidizer 8/18

Description

Deoxidizer 8/18 is applied to remove oxide layers and smut layers of aluminium and its alloys.
Deoxidizer 8/18 is slightly etching.
Deoxidizer 8/18 can be used in a diluted solution of nitric acid or sulphuric acid.
Deoxidizer 8/18 has the unique characteristic that dissolved copper in the etching bath can precipitate during etching.
Deoxidizer 8 Make Up is used for bath make-up and Deoxidizer 18 Replenisher is used for replenishment of the bath.

APPLICATIONS

1. Etching of aluminium
2. Removal of deposits after alkaline etching
3. Pretreatment before Alodine processes
4. Pretreatment before anodising
5. Decreasing of surface resistance before spot welding

NB: Deoxidizer 8/18 does not degrease. For degreasing, we advice alkaline degreasing.

Click here for details

Deoxidizer 30 L
Uranine dye sea marker MIL-S-17980 (Life Vests)

Description

Sea Dye Marker

Click here for details

Uranine Dye Sea Marker Mil S 17980
Mixer Gun Air 8.6 bar

Description

Mixer Gun Air, 8.6 bar for sealants

Click here for details

Mixer Gun Air 8 6 Bar
Oyltite Stck

Description

For temporary repair of oil and gasoline leaks. Stops leaks without draining. Applies from the outside. Excellent for emergency repairs. For gasoline tanks, fuel oil tanks, transmissions, oil-filled transformers. Will also seal against water, dilute acids and alkalies. For low pressure only, up to 15 PSI (1 BAR).

Click here for details

Oyltite Stick
Rubson - Isolatieschuim

Description

Isolationfoam

Click here for details

Rubson Isolatieschuim
Rubson - Foam Construction

Description

Not Available

Click here for details

Rubson Foam Construction
Lackfabrik Bäder - Schrauben-Sicherungslack

Description

Name of product/Package size: SCHRAUBEN-SICHERUNGSLACK in alloy-tubes of 20ml each

Chemical characterization: Based on combination of cellulose-nitrate/alkyd-resin Free of heavy metals, dibutyl phtalate, silicone and CFCs

Pretreatment of surfaces: Surfaces must be cleaned of grease, oil, humidity and rust. Please perform compatibility tests to your application/material demands

Processing: Apply directly to fittings dropwise, use the extension-tip to reach even poorly accessible connections

Typical application: Sealing/locking/labelling of screws, threads, housings, boxes and all kinds of mechanical connections/fittings

Chemical properties: Resistant to oil, petrol and water; also to diluted acids/alkaline solutions; high mechanical strength

Colours: Yellow, red, blue, green, white, grey, black, colourless/transparent

Drying time: Touch-dry after 5-30 min highly depending on layer-thickness; completely hardened/set after 2-3 days. Please test to your individual requirements.

Cleaning: Product residues+impurities are easily removed with acetone

Flashpoint: 29°C (EN ISO 3679:2004)

Solubility in water: Insoluble

Click here for details

Schrauben Sicherungslack
3M - Polyrethane Protective Boot SJ8665

Description

Polyurethane Protective Boots SJ8665, SJ8667, SJ8681, SJ 8672, SJ8641, SJ8663 and SJ8545 are made of an abrasion resistant ployurethane and are resistant to ultraviolet light. They can be painted or applied over painted surfaces. They are available in a variety of shpaes and colors for many industrial and common aircraft applications (including radomes, wing tips, landing gear pods, prop spinners, ect.). The products is constructed with a long-aging, solvent resistant, pressure-sensitive acrylic adhesive, and protected with an easy-release liner.

Click here for details

Protective Boot
Klevoglass 2002 G1

Description

Non-ignitable polyurethane finish with a layer (in suspersion) of aluminium power, in grey.
This type of finishing is applied in isolation of steam, condensation, exhaust, ducts etc.
Withstands 500C maximum heat.

Click here for details

Klevoglass 2002 G1
Huntsman - Renlam CY 219 25 kg

Description

KEY PROPERTIES
• High mechanical strength at room temperature
• Tack-free at room temperature
• Highly compatible with glass fabrics and fillers
• Tack –free with choice of pot life and curing rate according to hardener
• Can be filled with mineral or metal materials
APPLICATIONS
• Construction of jigs, foundry patterns and tooling aids
• General tool building
• Wet lay-up tools using glass ply
• Backing structures

Click here for details

Huntsman Renlam Cy 219 25Kg
Huntsman - REN HY 5162 20kg

Description

KEY PROPERTIES
• Suitable for full or face castings
• Cures at room temperature
• Cure rate determined by choice of hardener
• Layers up to 80mm thick can be cast in a single operation
• Readily machinable when cured
• Mixes can be pigmented with colouring pastes DW 0131-DW 0137

APPLICATIONS

• Construction of foundry patterns
• Jigs and fixtures
• Copy-milling models
• Working models for the ceramics industry
• Suitable for a wide range of applications

Click here for details

Huntsman Ren Hy 5162 20Kg
Wacker - Primer G 790

Description

WACKER® PRIMER G 790 is a solution of reactive siloxanes and silanes in an organic solvent. The primer composition can be applied to the substrate as such or diluted. During evaporation of the solvent and on exposure to atmospheric humidity at ambient temperature a rigid primer film is formed which firmly adheres to the substrate. Application of a silicone rubber onto the primed substrate and subsequent vulcanization will then result in a tight bond between the silicone rubber and the substrate.

Click here for details

Wacker Primer G 790
VV-P-236

Description

VV-P-236 Technical Petrolatum

Armite Petrolatum Technical Light Lubricating Grease Spec. VV-P-236 This petrolatum is intended for use as a light grade lubricating grease. It is not recommended for use as a lubricant in heavy loaded or hot-running bearings.

Details:

  • Brand - Armite
  • Petrolatum Technical
  • VV-P-236
  • 1Lb Can

Specifications:

  • VVP-236A


Click here for details

Vv P 236 Technical Petrolatum
Pneumatic Engine 5500-01

Description

Pneumatic Engine 5500

Click here for details

Pneumatic Engine 5500 01
Tournevis Dynamometrique Out 87-1

Description

Tournevis Dynamometrique Out 87-1

Click here for details

Tournevis Dynamometrique Out 87 1
Extracteur out 74

Description

Extracteur out 74

Click here for details

Extracteur Out 74
D 93 ME4842172

Description

D 93 ME4842172

Click here for details

D 93 Me4842172
90-ISP-9IC-065 C02 Cylinder

Description

Click on link below:

90 Isp 9 Ic 065 Cylinder Co2

Click here for details

90 Isp 9 Ic 065 Cylinder Co2 60 Gr Carbon Dioxide
Kontakt Chemie - Heat Sink Compound

Description

Heat sink compound is used to increase the thermal conductivity and the efficient heat dissipation at electronic components. Typical applications include printed circuit boards, electronic components and control assemblies.

Click here for details

Heat Sink Compound
Biobor JF

Description

Diesel and jet fuel microbicide.
Biobor JF is a liquid fuel additive that combats fungus and other microtive life in hydrocarbon fuels, such as diesel and jet fuels, but is also effective in light oils and transmission fluid.

Click here for details

Biobor Jf
White Spirit BS245

Description

White Spirit is a top-quality solvent refined to meet the strict requirements of BS245. It is recommended for paint thinning as it will not affect the drying time of the majority of oil-based paints. Also suitable for cleaning paint brushes and for general DIY cleaning purposes. White Spirit is the most popular and widely used of all paint solvents.

Click here for details

White Spirit Bs245
Technicoll - 9604

Description

1-component halogenated solvent for rubber and thermoset caoutchouc (TR)

Apply technicoll® 9604 equally with a brush (no metal enclosure). After evaporating for 60 minutes, join the substrates with a solvent based PUR adhesive (e.g. technicoll® 8044). Verify applicability of technicoll® 9604 because of the different kinds of rubber materials. The application of the fluoresced halogenated solvent can be checked under UV light. When working with thermoplastic caoutchouc (TR), a longer airing time may be necessary, depending on the material.

Click here for details

Technicoll 9604
Fluorescein Sodium

Description

Fluorescein Sodium (C.I. 45350) for analysis adsorption indicator

Click here for details

Flourescein Sodium
Emsure - Propanol

Description

N/A

Click here for details

Propanol
Semco 1250 Battery Powered Dispenser

Description

The SEMCO® Model 1250 is a battery powered dispensing gun intended for the application of sealants, adhesives, potting compounds, and other materials packaged in Semco cartridges or SEMKIT® Packages. The unit is designed for usage in the aerospace and electronics industries and offers the convenience of a light-weight, powered dispensing solution without the hassle of an air hose. Each unit comes with (2) 12V lithium-ion batteries, a 2.5 oz. threaded plastic retainer, a 6 oz. threaded.

Recommendations

The Semco Model 1250 dispensing gun is designed to be used with materials packaged in Semco cartridges with a wiper plunger (WP) ONLY. Typically, pre-mixed and frozen sealants are packaged with a black P-plunger with which this gun is NOT COMPATIBLE. Aerospace sealants supplied in Semkit packages are most commonly packaged with a wiper plunger (WP), which is what this gun is specifically designed for. Additional retainers for this unit must be purchased separately.

Accessories

PPG's aerospace business provides precision molded Semco brand cartridges, plungers, nozzles, sem-luer adapters, and sem-needles. When these accessories are used in conjunction with the Semco Model 1250 dispensing gun, the exact amount of material can be dispensed at the precise location required.

TDS Semco Battery Powered Gun 1250

Video of the Semco model 1250 dispenser

Information source: PPG Aerospace

Click here for details

Semco Model 1250 Battery Powered Dispenser
Kester 197 Soldering Flux

Description

Kester 197 Mildly Activated Rosin Liquid Flux is a homogeneous solution of high quality purified Grade WW rosin in a specially blended alcohol vehicle into which a very small amount of an extremely effective activating agent has been incorporated. 197 is classified as Type ROL1 flux under IPC ANSI/J-STD-004 Joint Industry Standard. 197, under MIL-F-14256, was QPL approved as Type RMA. 197 has proven to be nearly as active in fluxing ability as highly activated rosin fluxes, but the flux and its residue are considerably less conductive. The low conductivity results from a minimum of ionic activating agent as shown by the very high water extract resistivity. The rosin residue is non-corrosive, non-conductive and moisture and fungus resistant. The dry rosin residue actually insulates the surface from atmospheric corrosion.

Click here for details

Kester 197 Soldering Flux
M.E.K. Peroxide

Description

Methyl Ethyl Ketone Peroxide

Click here for details

M E K  Peroxide
Enthone M-9-N 2 part Ink

Description

M-Series inks are permanent, two component, epoxy-based marking inks. They may be used with a selection of
catalysts which cure at elevated and/or room temperatures. When properly applied and cured, M-Series inks have
excellent adhesion to glass, metal and thermosetting plastics. They have excellent chemical and thermal
resistance properties.
M-Series marking inks are used in the electronic, aerospace, automotive, appliance and decorative packaging
industries. Uses include the permanent marking of semiconductor components, printed circuit boards, connectors,
dials, nameplates, panels, chassis, glass and thermoplastics.

Click here for details

Enthone M 9 N
Extrude Medium

Description

Extrude Medium Body - Green, Regular Set vinyl polysiloxane, 32 Cartridge Package: 16 2-paks (32 - 50 ml Medium Cartridges Total) and 96 Universal Mixing Tips - Green.

Click here for details

Kerr Extrude Medium
Epikote 816

Description

EPIKOTE Resin 816 is a low viscosity epoxy resin produced from bisphenol A and epichlorohydrin, and containing an added proportion of Cardura E10P (glycidyl ester of neodecanoic acid) as a reactive diluent. EPIKOTE 816 is of low volatility and mild odour, which gives the resin its agreeable handling characteristics. EPIKOTE 816 provides good pigment wetting and good resistance to filler settling. As judged by laboratory tests, EPIKOTE 816 is considered to have a moderate resistance to crystallisation on storage.

Click here for details

Epikote 816
MIL-DTL-85054D Type II

Description

MIL-DTL-85054D Type II Corrosion Preventative Compound

A transparent, water-displacing, corrosion preventive compound, available in high and low volatile organic compound (VOC) types, which may be applied by brushing or spraying.

Click here for details

Mil Dtl 85054 D Type Ii Corrosion Preventative Compound
Sifco Cadmium

Description

SIFCO ASC provides a new highly portable cadmium travel kit for low hydrogen
embrittlement touch-up applications. The kit, specifically designed for the aerospace
industry, is ideal for AOG operations where repair times are critical. This kit features the
maximum amount of cadmium solutions allowed for shipment via commercial and private
ground carriers.
When an aircraft is grounded for critical repairs, revenue is at risk. The touch-up kit
was designed for situations where time is of the essence. The SIFCO ASC kit contains
everything a trained technician needs to quickly make repairs and get aircraft back into
service.

Click here for details

Sifco Cadmium
Kester 5760 Neutralizer

Description

Kester 5760 Neutralizer is a buffered, alkaline concentrated formula which effectively removes both organic and inorganic acid flux residues. This includes water-soluble fluxes used in wave soldering, hot air leveling and infrared reflow processes. Simple neutralization with caustic soda or other alkaline solutions will not completely remove ionizable, potentially corrosive and conductive residue which is formed during soldering.

Kester 5760 Neutralizer will completely solublilize chloride complex residues such as lead chloride by selective chelation so that a water rise will remove all traces of harmful contamination.

Click here for details

Kester 5760
Red LED Lighted Safety Marshalling Wand

Description

The new AERO Specialties red LED safety marshalling wand is the brightest and most durable wand available for traffic safety and communication. This bright LED wand features a loud (120 dB) SOS alarm and three (3) light modes to capture attention and ensure visibility in any weather or traffic scenario. Clearly visible up to a mile away, you can safely guide your aircraft with these ramp-grade marshalling wands. The wand is powered by three (3) AA batteries, allowing for 400 hours of operation.

  • Three (3) modes: steady, flashing, and white flashlight
  • Lasts 400 hours on three (3) AA batteries
  • Can be clearly seen from over a mile away (1.6 km)
  • Waterproof
  • Loud SOS safety alarm whistle (measured at 120dB)
  • Magnetic base
  • Five (5) red LED lights
  • One (1) white LED light
  • Non-slip handle
  • Lanyard included
  • Silicon rubber buttons
  • Independent whistle and light buttons
  • Rugged, impact resistant construction
  • Highly reflective film inside enhances visibility
  • Top of the wand can be used to break glass if trapped in a vehicle

Click here for details

Wand Lighted Red Led
WBT - WBT-2 portable electric scissors

Description

WBT-2 Electric Scissors Cutting Range (Do different surfaces for different materials, the following is for reference only)

1. Sponge, felt, knitted cotton within 15MM
2. Clothing, textile fabrics, knitwear, curtains within 8MM
3. Glass fiber, imitation leather, rubber, carpet, soft plastic, paper
4. Within 3MM leather, carbon fiber, aramid

Charger rated voltage: 100 ~ 240V 50 / 60HZ
Rated power: 35W
Battery capacity star: 5000 mAh
Rated no-load speed: 6000 rpm
Charging time: 140 minutes
Charging current: 2.5 amps
General cutting capacity: 0 ~ 8mm
Battery type: Power lithium battery

Click here for details

Wbt 2 Portable Electric Scissors
Airtech Digital Vacuum Gauge 40D

Description

Vac-Gauge 40D is a versatile digital vacuum gauge used for lead detection and vacuum determinations under your vacuum bag. the gauge offers vacuum readings in four selectable units: mBar, mmHg, inHg and KPa. A heavy duty rubber jacket protects the gauge from damage in normal shop use. The Vac-gauge 40D connection stem is a 1/4-18 inch NPT thread fitting that fits easily into the Airlock 450TF & TF and AQD quick disconnects.

Click here for details

Airtech Vac Gauge 40 D
Airtech premium multi valve 407

Description

Using pliers remove retaining clip on the underside of MV 407. The valve mechanism can easily be removed through the base. Inspect and replace worn items and then re-assemble using the reverse process.

Click here for details

Airtech Premium Multi Valve 407
Airtech VAC Leak LEQ-70

Description

VacLeak LEQ-70 is a compact economical vacuum leak detector for finding leaks in vacuum bags, sealant tapes, hoses and fittings. VacLeak LEQ-70 converts the ultrasonic sound produced by leaks to an audible level and also visually displays the leak on an LED meter. The sound is further amplified as the receiver is placed closer to the leak source. Comes with a convenient carrying case.

Click here for details

Airtech Vac Leak Leq 70
Zip Chem Cor-Ban 27L

Description

Cor-Ban 27L is on the QPL for BMS 3-38 and is listed on NSN 6850-01-469-7645. Cor-Ban 27L has been formulated to function as a non-drying, wide temperature range, corrosion inhibiting compound for static joint applications on a multitude of substrates. A thixotropic, buff-colored film can be achieved on any metal surface and will maintain a flexible protective coating that will withstand high ultra violet exposure in highly corrosive environments. Cor-Ban 27L has been approved by Boeing Commercial Airplane Company as a substitute for current BMS 3-27 materials in some applications where BMS 3-27 is specified on the drawing. For inservice applications please contact appropriate manufacturer's service engineering.

Click here for details

Zip Chem Corban 27 L Corrosion Inhibiting Compound 1 Usq Can Bms3 38
AFL - Alnox Electrical Joint Compound

Description

Pad-to-pad connections where the operating temperatures are at or below 250ºC (482ºF). Used for aluminum to aluminum or copper to aluminum application.

Click here for details

Afl Alnox Electrical Joint Compound
Novatio Astro Grip

Description

Astro Grip prevents tools from slipping on damaged bolts, screws, socket screws,... Astro Grip is composed of an industrial diamond powder and a biologically degradable gel. When Astro GripP is used on damaged objects such as rounded screwheads, the solid particles (diamand powder) are pressed between the tool and the screwhead and thus provide the required grip. The industrial diamond powder remains stuck to the tool thanks to the gel and it can be removed easily after use. This method offers you 800% more grip.

Physical form: liquid. • Odour: Characteristic odour. • Dynamic viscosity: 0.4 Pa.s ; 20 °C. • Kinematic viscosity: 327 mm²/s ; 20 °C. • Melting point: 0 °C. • Boiling point: 100 °C. • Evaporation rate: 0.3 ; butyl acetate. • Vapour pressure: 23.32 hPa ; 20 °C. • Solubility water: soluble. • Relative density: 1.2. • Shelf life: 36 months, keep dry, cool and frostproof.

Click here for details

Novatio Astro Grip
Hypox compound and hardener

Description

N/A

Click here for details

Hypox Compound And Hardener
3M - Scotch-Brite Handpad Medium 9447

Description

3M Scotch-Brite schuurpad is een non-woven schuurmateriaal. Door de open constructie blijft het materiaal scherp en loopt niet vol. Door de verende eigenschap worden zowel de hoge als de lage delen van het te schuren oppervlak bereikt.

Click here for details

Scotch Brite Handpad Medium
Devcon Zip-Patch Permanent Repair System

Description

High-technology, adhesive-impregnated patching system that cures at room temperature and makes permanent, waterproof field repairs to pipes, tanks, and containers.

Key Features

  • Easy-to-use, fast-setting patch kit
  • Hardens to a tough, durable waterproof finish in minutes
  • Excellent adhesion to iron, steel, stainless steel, titanium, fiberglass, aluminum, wood, ceramics, composites, acrylics, PVC, and most other plastics
  • Minimal surface preparation
  • Listed under NSN Stock #8040-01-309-1064
  • Open Time: 5 Minutes
  • Color: Brown
  • Unit Size: 4" x 9" Patch (10 cm x 23 cm)

Click here for details

Devcon Zip Patch Permanent Repair System
TOP