Customer demand has led to our range of tape products being expanded. The current range includes; film tapes, glass cloth tapes, self-adhesive tapes, vinyl tapes and polyurethane tapes to name a small selection. A small range of our products is shown below. Please contact us if you can't find your product. Our sales rep is happy to serve you with the product that you need.
3M™ Aluminum Foil Tapes 425 and 427 are 5 mil nominal dead soft aluminum foil
backing combined with a transparent acrylic adhesive. 3M aluminum foil tape 427
offers an easy-release liner.
3M™ Glass Cloth Tape 398FR is a
flame retardant solution for cargo bays
and other aerospace MRO applications.
Pressure sensitive acrylic adhesive
bonds on contact to many surfaces.
High adhesion is secure for extended
periods, resisting wear and spills.
Removal is clean and easy when you
No description available
Completely inert to virtually all known acids, alkalies and caustics.
High density, high specific gravity non-expanding.
Prevents corrosion when threaded fittings of dissimilar metals are joined.
This product is not toxic, does not affect food, pharmaceuticals, fuels and or petrochemicals.
Effective over a wide temperature range: -65°F to 300°F/ -54°C to 149°C
This product will not harden and is permanently self lubricating
Keeps threads dust free and protects them from potential physical damage.
Packaged on a plastic spool in an easy to use snap on case.
Flashbreaker tape 1 is used for heavy duty hold down applications where a high level of adhesion is required.
Flashbreaker tapes are a high temprature polyester film coated with high tack silicone adhesive for oven or autoclave to 240C. There are ideal for holding down heavier non-woven breather materials.
Flashbreaker 2R is a polyester pressure sensitive tape coated with a high tack, non-silicone adhesive. This tape holds down vacumm bagging materials and thermocouple wires om metal or composite parts and tooling. Is a superior tape for holding down non-woven breather materials.
No description available
Aluminium adhesive tape - heat resistant. On plastic pipe, the heating cable must be covered with the aluminium adhesive tape along its entire length. Allow 55m roll for approx 50m of pipework.
Flat braided tape maufactured from 100% high tenacity continuous
filament polyester yarn. This tape is impregnated with a specially
formulated synthetic elastomer finish to improve knot holding and tying
Flat braided tape manufactured from continuous filament Nomex yarn.
This tape is impregnated with a specially formulated synthetic elastomer
finish which improves knot holding and tying characteristics. Shelf life is
Flat braided tape maufactured from 100% continuous filament Teflon coated fiberglass yarn.
The 2" x 55 yard roll of black P-665 Tape from Shurtape is a matte, vinyl coated cloth tape with a synthetic rubber adhesive. It is useful for holding wiring, lighting, and props. It can even assist with the color-coding of cables. The tape has a high adhesion and tack and can be removed without leaving any residue. The 11.5 mil tape is hand-tearable and can be used in temperatures ranging from 45 to 200°F.
KB 49 adhesive tape is made of a Pressure Sensitive Adhesive film
protected by a white silicon paper.
It has been designed to protect cabin floors in humid areas like galleys
Its standard application is on composite floors.
KB 49 Qualified according ABS 5093 B & ABS 5725 A
Transparent Foil appearance
It is available in various widths, from 25 to 485 mm.
GORE SKYFLEX Aerospace Materials effectively seal panels and protect against mechanical forces and harsh environments that can damage aircraft structures, like vibration, corrosion, high temperatures, aggressive fluids, UV radiation, and other environmental hazards that tend to break down and weaken traditional materials. Also, unlike traditional two-component materials, our materials are lightweight, non-curing, and simplify the process by reducing installation steps.
Why use materials that are time-consuming and labor-intensive, can delay production and maintenance schedules, and cost more money overall. Optimize your production using GORE SKYFLEX Aerospace Materials that provide durable sealing and surface protection, increase availability and throughput, and reduce life-cycle costs.
No description available
Breyden Nomex Tape 250 yards, MIL-T-43435B Type V
3M™ Adhesive Transfer Tape offers outstanding adhesion on metal and high surface energy plastics.
This is a non-flame retarded hot melt black adhesive tape which is based on EVA/polyamide polymers. The tape is often pre-applied to moulded shapes and the pre-coat designation is /180
Pre-cured polyurethane tape sealant with fiberglass carrier and PTFE backing for one sided sealing.
Designed for repeated use to seal and moisture-proof irregular surfaces where abrasion resistance
is required. The system demonstrates excellent adhesion to itself (cohesion) and allows for easy
removal when necessary. Also available die cut in gasket form. Common use is under floor boards,
under lavs and galleys, under door sills and on stringers. Also available in flame retardant (FR).
High strength product for static and/ or dynamic stress. Suitable to fasten and seal bolts and nuts as well as stud bolts. Dependent on the diameter of used threads, it will be tough or impossible to loose the bonding. The product resists very good against high temperature and chemical influence.
3M™ Polyurethane Protective Tape 8671HS is made from an abrasion-resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light. 3M 8671HS tape provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. It can be installed in a minimum amount of time with simple tools. It can be painted or applied over painted surfaces. 3M 8671HS tape is constructed with a long-aging, solvent-resistant, pressure-sensitive acrylic adhesive that is protected with an easy-to-release paper liner.
SOLDER WIRE - This binary soldering alloy is produced from 'first smelting' of tin and lead and conforms to standards: NF 90550, DIN 1707L, B.S.219 and BS EN Alloys.
3M™ Adhesive Transfer Tapes 941, 966, 9461P, 9461PC and 9462P use the same 3M™ High Temperature Acrylic Adhesive 100 and come with different liners for a variety of die cutting applications. 3M™ Adhesive Transfer Tape 965 uses a slightly modified 3M™ High Temperature Acrylic Adhesive 100 to provide excellent resistance to jet fuel and other chemicals for identification labels on aircraft.
• Excellent bond to metal and high surface energy plastics.
• Outstanding temperature and chemical resistance.
• Two adhesive thicknesses: 1 mil for thin profile labels and 2 mil for rougher surfaces.
• Low outgassing and low leachable chloride, important considerations for electronic and aerospace industries.
• Available on various liners for specialized processing:
– 62# Densified Kraft for die-cutting metal nameplates
– 55# Densified Kraft for rotary die-cutting specialty labels
– 58# Polycoated Kraft for moisture stability
3M™ Polyurethane Protective Tape 8681HS is made from an abrasion-resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light. 3M 8681HS Tape provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. 3M 8681HS Tape is constructed with a long-aging, solvent-resistant, pressure-sensitive acrylic adhesive that is protected with an easy release plastic liner. Available in skip slit or non-skip slit liner and matte transparent or gray.
3M™ Vinyl Tape 471 and 4712 are a conformable colored (9 colors plus transparent) tapes made from vinyl backing with rubber adhesive. They are ideal for many lane and safety markings, color coding, abrasion protection, masking, sealing, splicing and other general purpose applications. 3M vinyl tape 4712 is a linered version of 3M vinyl tape 471 that may be used for die cutting or large area applications.
VpCI (Vapor phase Corrosion Inhibitor) 126 MIL film combines the latest film technology with the most effective corrosion protection for all of your metal products. Sealing your product in Cortec VpCI MIL film protects metal parts from all types of corrosion including rust, tarnish, stains, white rust, and oxidation for up to 5 years.* It’s as easy as putting your product in a Cortec VpCI package!
Cortec VpCI-126 MIL film replaces conventional rust preventatives such as oils and desiccants. You save even more because Cortec VpCI packaging eliminates all the degreasing or coating removal required in the past. Your product can now be used immediately. VpCI-126 MIL is transparent, making it easy to identify parts. Additionally, it does not contain free amines, phosphates, halogen-based materials; and is non-toxic and recyclable.
LOCTITE® 55™ is a general purpose, threaded pipe and fitting sealant which is wound from the dispensing package onto the threads of the pipe. It is supplied in containers, which serve for both storage and dispensing purposes. Recommended for sealing metal and plastic tapered pipe threads and fittings up to 4" NPT (National Pipe Thread) for use in industrial applications in aqueous and non-aqueous fluids. Particularly suitable in threaded assembly applications that require immediate use and may undergo small readjustments before use. This product is typically used in applications up to 149 °C.
ORCOTAPE® OT-157TN is a pressure-sensitive, reinforced metalized polyvinyl fluoride tape used in fabrication, repair and installation of thermal/acoustic aircraft insulation blankets. Meets the latest EU REACH, US EPA and Boeing environmental safety requirements.
Scrim reinforced metalized polyvinyl fluoride backing, boated with a high performance acrylic PS adhesive protected with a paper liner.
• Strong, yet lightweight
• Excellent adhesion to covering films as well as to fibrous insulation materials and aircraft aluminum
Used for making, installing and repairing aircraft thermal/acoustic insulation blankets.
Scotch Brite Handpad Red WR-SH 100mm x 10M
Tubular braid cross section 7.06mm² nominal diameter 8 mm made of tinned copper.
Tinned copper wire in accordance with EN 13 602
Tubular braid cross section 5.89mm² nominal diameter 6 mm made of tinned copper.
Tinned copper wire in accordance with EN 13 602