Sealants

Buy Sealants? SECOA supplies a range of sealants for a wide variety of applications, including; adhesive, corrosion inhibitive, epoxy, firewall, fuel tank, gasket, jointing compounds, polysulphide, polyurethane, silicone and other speciality sealant products. Sealants Europe SAS (PPG) formerly known as Le Joint Francais is the key manufacturer of sealants that SECOA supplies. A small range of our products is shown below. Please contact us if you can't find your product. Our sales rep is happy to serve you with the product that you need.

Aircraft Sealants | Sealants kopen ? | Buy sealants?

Aerospace sealants - adhesion promoters - corrosion inhibitive sealants - electrical potting & molding - conductive - fast cure - fuel tank & high performance - high temperature and firewall - windshield and canopy - industrial sealants and adhesives. See below a list of all our sealants. Use quick search

BUY SEALANTS AT SECOA

PPG - JFM 1675 Class B Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1440M - please contact us for more information.


Click here for details

Jfm 1675
PPG - JFP 7010 Adhesion Promoter

Description

Designed to prepare metallic or elastomeric substrates before application of Silicone sealants : PR 1910 et PR 1930

Click here for details

Ppg Sealants Europe
PPG - PR 1005L Specialty Sealant

Description

Aircraft integral fuel tank slosh coating

Click here for details

Pr 1005
PPG - PR 1196 Specialty Sealant

Description

Protective coating against fuel vapor

Click here for details

Pr 1196
PPG - PR 1428 Class A Low Adhesion Sealant

Description

Low adhesion sealant designed to use as access door sealant

Click here for details

Pr 1428
PPG - PR 1428 Class B Low Adhesion Sealant

Description

Low adhesion sealant designed to use as access door sealant

Click here for details

Pr 1828
PPG - PR 1440 Class A Fuel Tank Sealant

Description

Brush consistency compound for sealing integral fuel tanks and pressurized cabins

Click here for details

Pr 1440
PPG - PR 1440 Class B Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins

Click here for details

Pr 1440
PPG - PR 1440 Class S Fuel Tank Sealant

Description

Sprayable Fuel Tank Sealant
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1440MS - please contact us for more information.

Click here for details

Pr 1440
PPG - PR 1440 M Class A Fuel Tank Sealant

Description

Brushable compound and fast cure designed for sealing integral fuel tanks and pressurized cabins

Click here for details

Pr 1440
PPG - PR 1440 M Class B Fuel Tank Sealant

Description

Filleting compound and fast cure designed for sealing integral fuel tanks and pressurised cabins

Click here for details

Pr 1440
PPG - PR 1440 M Class S Fuel Tank Sealant

Description

Fast curing product for sealing integral fuel tank and pressurized cabins to protect internal and external surfaces

Click here for details

Pr 1440
PPG - PR 1460 Q Potting and Sealing Compound

Description

Fuel resistant solvent free, electrical potting and sealing compound

Click here for details

Pr 1460 Potting
PPG - PR 148 AF Adhesion Promoter

Description

Designed to prepare metallic or painted substrates before application of Polysulfide sealants

Click here for details

Pr148 Sealant Adhesion Promoter
PPG - PR 1710 High Temperature Protective Coating

Description

High temperature protective coating
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1791 - please contact us for more information.

Click here for details

Ppg Sealants Europe
PPG - PR 1720 SM High Temperature Fuel Tank Sealant

Description

Brushing compound for sealing integral fuel tank and pressurized cabins.

Click here for details

Ppg Sealants Europe
PPG - PR 1733 Adhesion Promoter

Description

Primer used to prepare metal or paint surfaces before application of VITON sealant
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1735 - please contact us for more information.

Click here for details

Ppg Sealants Europe
PPG - PR 1750 Class A Fuel Tank Sealant

Description

Brush consistency compound for sealing integral fuel tanks and pressurized cabins

Click here for details

Pr 1750 Range
PPG - PR 1750 Class B Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins

Click here for details

Pr 1750 Range
PPG - PR 1764 M Class B Electrically Conductive

Description

Sealant for metalization and electromagnetic armor. Corrosion inhibitor without chromates & without aromatic solvents

Click here for details

Pr 1764
PPG - PR 1770 Class A High Strength Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins

Click here for details

Ppg
PPG - PR 1770 Class B High Strength Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins

Click here for details

Pr 1770 B
PPG - PR 1770 Class C High Strength Fuel Tank Sealant

Description

Filleting compound for sealing integral fuel tank and pressurized cabins

Click here for details

Ppg Sealants Europe
PPG - PR 1771 Class B Corrosive Inhibitive Sealant Non-Chromate Low Gravity

Description

Provides an effective barrier against the common causes of corrosion in aircraft

Click here for details

Pr 1771
PPG - PR 1772 Class B Low Weight Fuselage Sealant

Description

Low Weight Fuselage Sealant

Click here for details

Ppg
PPG - PR 1773 Class A Corrosion Inhibitive Sealant Non-Chromate Low Adhesion

Description

Non-chromate corrosion inhibitive sealant designed for use as access door sealant

Click here for details

Pr 1773
PPG - PR 1773 Class B Corrosion Inhibitive Sealant

Description

Non-chromate corrosion inhibitive sealant designed for use as access door sealant

Click here for details

Ppg
PPG - PR 1776 Class A AS Fuel Tank Sealant

Description

Filleting compound low gravity for sealing integral fuel tank and pressurized cabins

Click here for details

Ppg Sealants Europe
PPG - PR 1776 Class B Fuel Tank Sealant

Description

Filleting compound low gravity for sealing integral fuel tank and pressurized cabins
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1776M B or PR1782 B - please contact us for more information.

Click here for details

Ppg
PPG - PR 1782 Class A Fuel Tank Sealant Fast Cure

Description

Low gravity and fast cure sealant for integral fuel tank

Click here for details

Ppg Sealants Europe
PPG - PR 1776 Class S Sprayable Fuel Tank Sealant

Description

Sprayable aircraft integral fuel tank sealant low gravity
Please note:
Product has reached end of life and has been discontinued. Alternative product PR1782 S - please contact us for more information.

Click here for details

Ppg Sealants Europe
PPG - PR 1782 Class B Fuel Tank Sealant Fast Cure

Description

Fuel tank sealant, low gravity, fast cure

Click here for details

Pr1782 B2 Sk654
PPG - PR 1782 Class C Fuel Tank Sealant

Description

Flowable compound, low density for sealing the faying surface of integral fuel tanks and pressurized cabins

Click here for details

Pr 1782 C
PPG - PR 1782 Sprayable Fuel Tank Sealant

Description

Brush consistency low gravity compound for sealing integral fuel tanks and pressurized cabins

Click here for details

Ppg Sealants Europe
PPG - PR 1784 B Windshield and Canopy Sealant

Description

Aircraft windshield and canopy sealant

Click here for details

Pr 1784
PPG - PR 1826 B ALO Aluminum Grey Quick Repair Sealant

Description

Thixotropic aluminium colored compound for use on the exterior of aircraft to provide aerodynamic smoothness.

Click here for details

Pr 1826
PPG - PR 1826 Class B Aluminum Grey Quick Repair Sealant

Description

Thixotropic aluminium colored compound for use on the exterior of aircraft to provide aerodynamic smoothness.

Click here for details

Pr 1826
PPG - PR 1826 Class B Fast Cure Fuel Tank Sealant

Description

Rapid Curing integral fuel tank sealant. Quick repair

Click here for details

Pr 1826
PPG - PR 1827 R 1/3 LO Fuel Tank Sealant Rapid Curing - Low Odor

Description

Flowable rapid curing compound for sealing the faying surface of integral fuel tanks and pressurized cabins

Click here for details

Ppg Sealants Europe
PPG - PR 1827 R 1/6 Fuel Tank Sealant Rapid Cure

Description

Rapid curing fuselage sealant

Click here for details

Ppg Sealants Europe
PPG - PR 1828 B Fuel Tank Sealant Rapid Curing

Description

Rapid curing, primerless to most common substrates, aircraft integral fuel tank sealant

Click here for details

Pr 1828
PPG - PR 1828 B LO Fuel Tank Sealant Rapid Curing Low Odor

Description

Rapid curing, primerless to most common substrates, aircraft integral fuel tank sealant

Click here for details

Pr 1828
PPG - PR 1829 Class B Windshield and Canopy Sealant Fast Cure

Description

Rapid curing aircraft windshield and canopy sealant

Click here for details

Pr 1829
PPG - PR 184 Adhesion Promoter

Description

Designed to prepare metallic or painted substrates before application of Polysulfide sealants

Click here for details

Pr 184 Range
PPG - PR 186 Adhesion Promoter

Description

Designed to prepare metallic or painted substrates before application of sealants like PR 1828

Click here for details

Pr 186
PPG - PR 1910 High Temperature Sealant

Description

Silicone sealant designed for outstanding resistance to aging

Click here for details

Ppg
PPG - PR 1930 High Temperature Sealant

Description

Silicone sealant designed for outstanding resistance to aging

Click here for details

Ppg
PPG - PR 812 Firewall Sealant

Description

High temperature primerless firewall sealant

Click here for details

Ppg
PPG - PS 700 Firewall Sealant

Description

High temperature primerless firewall sealant

Click here for details

Ps 700
PPG - PS 860 Class B 1/6 Quick Repair Aircraft Integral Fuel Tank Sealant

Description

Quick repair aircraft integral fuel tank sealant

Click here for details

Ps 860
PPG - PS 870 Corrosion Inhibitor A / B & C

Description

Corrosion inhibitive sealant

Click here for details

Ps870
PPG - PS 890 Fuel Tank Sealant

Description

Integral Fuel Tank Sealant

Click here for details

Ps 890
PPG - PS 890 Class B Fuel Tank Sealant

Description

Integral Fuel Tank Sealant

Click here for details

Ps 890
PPG - PS 890 Class C 24 Fuel Tank Sealant

Description

Flowable compound for sealing the faying surface of integral fuel tanks and pressurized cabins

Click here for details

Ps 890
PPG - PS 890 MC 168 Fuel Tank Sealant

Description

Integral Fuel Tank Sealant

Click here for details

Ps 890
PPG - PS 892 B48 Fuel Tank Sealant

Description

Solvent free high viscous fuselage and fuel tank

Click here for details

Ps 892
PPG - PS 892 CM Faying Surface Sealing Compound

Description

Flowable compound with a long application time for sealing the faying surface of integral fuel tanks and pressurized cabins

Click here for details

Ps 892 Cm
Hylomar - PL32L Aerograde

Description

Hylomar Aero Grade is a highly engineered, polyester-urethane based non-setting and non-hardening
gasketing compound, for use in the aeronautical industry. Hylomar Aerograde was developed in
conjunction with Rolls Royce - Aerospace Division for sealing joints in jet turbine engines. Hylomar
Aero Grade can operate at temperatures from approximately –50°C to + 250°C.

Click here for details

Pl32 L
Royal - WS-8010 & WS-8020

Description

WS-8010 Class B is an Access door sealant designed to have very low adhesion characteristics and an excellent cure profile. The product can be exposed to a temperature range of -65°F (-54°C) to 250°F (121°C) without adverse effect. WS-8010 Class B uses manganese dioxide as a curing agent formulated to have an outstanding cure profile. The uncured material is a thixotropic low sag paste designed to be applied by extrusion gun or spatula. The product cures at room temperature to form a gasket with very low adhesion characteristics.
SPECIFICATIONS:
AMS-3284 Type I

WS-8020 Class A is two component manganese dioxide cured polysulfide sealant. This product is a low viscosity sealant designed to be brush applied to seal fasteners throughout the aircraft. The cured sealant has excellent fuel resistance as well as excellent sealing characteristics at temperatures ranging from -65°F (54°C) to 250°F (121°C), including intermittent exposure up to 360°F (182°C).
WS-8020 Class A exhibits excellent elastomeric properties and retention after prolonged exposure to jet fuel and aviation gasoline
SPECIFICATIONS:
AMS-3276 Class A
AMS-S-8802 Class A

Click here for details

Royal Ws 8020 Rc A 2
Standard Nozzles

Description

Description & Part Number

252 Nozzle 220538
254 Nozzle 220540
255 Nozzle 233495
410 Nozzle 220542
415 Nozzle 227613
420 Nozzle 220544
430 Nozzle 220548
440 Nozzle 220550
620 Nozzle 220553
640 Nozzle 220555
650 Nozzle 224494
820 Nozzle 220557
840 Nozzle 220559
1002 Nozzle 220561
1004 Nozzle 220563
1010 Nozzle 220565

Standard Nozzle Sizes




Click here for details

Nozzles
PPG - Mastinox 6856K

Description

Mastinox 6856K (Item Code 1102XXXX) is a chromated Jointing Compound that contains Strontium
Chromate (CAS# 7789-06-2) which has a REACh Sunset Date of January 22nd 2019.

Click here for details

Mastinox 6856 K
Momentive - RTV88 01P

Description

RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers.
They are supplied ready-to-use with a base compound and dibutyl tin dilaurate, DBT, as the standard curing
agent. DBT is suitable for most applications, however other catalysts are available to facilitate deep section
cure, faster cure and automated mixing.

Click here for details

Rtv88 01 P Can Sealants
3M - Edge Sealer 3950

Description

Edge sealing minimizes the adverse effects of rigorous use or prolonged or severe exposure
conditions by providing water and contaminant-tight seal between a graphic film and
substrate. It is required for some 3M warranted graphics (refer to the base film's Product
Bulletin for details). These products also may be applied even after the applied film shows
signs of wear, such as edge lifting, to significantly reduce further wear; however, such
application does not meet the requirements for warranted graphics.
Edge sealers 3950 and 4150S are single component colorless liquids.
Edge sealer 8914 is a clear tape used to seal vehicle window graphics and for sealing cut
edges and seams on watercraft graphics.

Click here for details

Edge Sealer 3950 Sealants
PPG - CA1000 BA 1002

Description

CA 1000 is a non-curing, non-chromate corrosion
inhibitive compound. It has a service temperature
range from -54°C (-65°F) to 116°C (240°F), with
intermittent excursions up to 135°C (275°F). This
material acts as an effective barrier against the
common causes of corrosion on aluminium alloys
or between dissimilar metals. The compound
remains permanently mastic after prolonged exposure
to aircraft fuels, both jet fuel and aviation gas.
CA 1000 is a one part, polysulfide compound. The
material is a thixotropic paste suitable for application
by brush or spatula.
This product is qualified to several manufacturers
specifications. Please contact PRC-DeSoto Europe
for further information.
The following tests are in accordance with Aerospatiale
ASNA 4191 specification test methods.

Click here for details

Ca1000 Ba1002 Sealants
Henkel - Loctite 569

Description

LOCTITE® 569™ is designed for the locking and sealing of
metal pipes and fittings. The product cures when confined in
the absence of air between close fitting metal surfaces and
prevents loosening and leakage from shock and vibration.

Click here for details

Loctite 569 Thread Sealant
Chemetall - Naftoseal MC-115

Description

Advantages:
Free of chrome and solvents/low in solvent content
Low temperature flexibility
Fast tack-free and cure times for high production rates
Good adhesion to various substrates
Excellent chemical resistance
High elasticity and resilience
Good thixotropic properties, no slump
Low and medium density products available

Applications:
For OEM and MRO applications
All aircraft applications requiring sealants

Naftoseal® polysulphide sealants are specifically designed to meet the challenging
requirements of the aerospace industry. The OEM and maintenance sectors both
benefit from a full range of easy-to-use and approved aircraft sealant technologies.
The application characteristics of Naftoseal® enable higher production rates.
In addition to the above mentioned advantages, our sealant technologies offer
eco-friendly properties: all components are chromate-free, solvent-free or very low
in solvent content.
Chemetall’s multi-purpose aircraft sealants can be used for all aircraft applications
requiring sealants, such as fuel tank, fuselage, floor panels and aerodynamic
smoothing. Adhesion promoters, tool and equipment cleaning technologies and
mixing devices round-off our portfolio and cover all aspects for an efficient and safe
sealant application.

Click here for details

Chemetall Naftoseal Mc 115 Kit 25
PPG - PS870 B2 Can
DSS1015 Surface Seal Kit

Description

SURFACE SEAL® coating quick application kit gets planes back in the air fast. Pilots appreciate the visibility enhancement in wet conditions of windshields with Surface Seal hydrophobic coating by PPG's aerospace business. With the quick application kit, maintenance personnel and general aviation operators appreciate how easy it is to restore or maintain windshield rain repellency in the field.

Click here for details

Dss1015 Surface Seal Kit
TackFast + Mixer gun

Description

Tack Fast Black Sealant with Mixer gun air

Click here for details

Mixer Gun Air 8 6 Bar Tack Fast Black
Hylomar - Advanced Form

Description

Hylomar Advanced Formulation is ideally suited for use as a gasket dressing, and flnge sealant. It will enhance the sealing capability of all types of gaskets and flanges. It will assist with alignment during assembly. The compound has excellent rheological properties, combined with resistance to most automotive fluids and many other chemicals. Being a non-setting and non-hardening compound it also has excellent resistance to joint vibration, shock and differential thermal expansion.

Click here for details

Hylomar Gasket Jointing Compound
Loctite - 549

Description

LOCTITE® 549™ is a ready-to-use, single component, gel-like anaerobic flange sealant that cures at room temperature when it is isolated from air contact. This product seals close fitting joints between rigid metal faces and flanges. It provides an instant seal to low pressures immediately after assembly of flanges. Typical application is as a formed-in-place gasket for pumps, thermostats, compressors, transmission housings and axle covers.

Click here for details

Loctite 549
Loctite - 570

Description

LOCTITE® 570 is designed for the locking and sealing of metal tapered threads and fittings. The product cures slowly when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature of LOCTITE® 570 reduces the migration of liquid product after application to the substrate.

Click here for details

Loctite 570
Loctite - 573

Description

LOCTITE® 573™ seals close fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc. The thixotropic nature of LOCTITE® 573™ reduces the migration of liquid product after application to the substrate.

Click here for details

Loctite 573
Loctite - 518

Description

LOCTITE® 518™ is a single component, medium strength, anaerobic sealant which cures when confined in the absence of air between close fitting metal surfaces. Typical applications include sealing close fitting joints between rigid metal faces and flanges. Provides resistance to low pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc. The thixotropic nature of LOCTITE® 518™ reduces the migration of liquid product after application to the substrate. LOCTITE® 518™ provides robust curing performance. It not only works on active metals (e.g. mild steel) but also on passive substrates such as aluminum with a low copper content. The product offers gap performance to 0.25 mm (0.01 in) and contamination tolerance. It cures in the presence of minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids and cleaners containing surfactants and corrosion inhibitors.

Click here for details

Loctite 518
Loctite - MR 5922

Description

LOCTITE® Product 5922 is a black, viscous paste with a characteristic alcohol odour. It is a slow drying, flexible setting paste that changes to a pliable, non-hardening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leakage. It increases the reliability of gasket seals.

Click here for details

Loctite Mr 5922
Henkel - Loctite 510

Description

Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges.

LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and engine casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

Click here for details

Loctite 510
Flamemaster - Windshield Sealant

Description

Windshield sealant repair

Click here for details

Windshield Sealant
3M - AC-350 B-2 Tank & Fuselage Sealant

Description

3M™ Aerospace Sealant AC-350 Class B are fast cure, intermediate density polysulfide sealant suitable for fuel tank and fuselage applications. These two-component, manganese dioxide cured sealants are solvent free and have outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals and petroleum products common to the aircraft industry. 3M AC-350 Class B Sealants maintain flexibility and bond strength on most metal substrates such as; aluminum, titanium, steel, stainless steel, glass, and many coatings under extremes of temperature, weathering and stress. The mixed compound is a thixotropic paste easily applied by extrusion, injection gun or spatula, and exhibits superb tooling properties.

Click here for details

Ac 350
Cartridges Only

Description

Description & Part Number
1 oz. (30cc) LD 220307
1 oz. (30cc) HD 233222
2.5 oz. (65cc) LD 220315
2.5 oz. (65cc) HD 220316
6 oz. (170cc) LD 220317
6 oz. (170cc) HD 220318
8 oz. (230cc) LD 220319
8 oz. (230cc) HD 220320
12 oz. (340cc) LD 220321
12 oz. (340cc) HD 220322
20 oz. (610cc) HD 229734
32 oz. (950cc) LD 232921
32 oz. (950cc) HD 232917
32 oz. (950cc) SHD white 233656
1/10 gallon (310cc) LD 230285
1/10 gallon (310cc) HD 229689

Disposable plastic cartridges are available in 1, 2.5, 6, 8, 12, 20, 32 oz. (approximate metric value 30, 65, 170, 230
340, 610, 950cc) and 1/10th gallon capacities. Available in low or high-density natural polyethylene, all sizes are fit
with 1/4" NPT (6mm) female thread dispensing orifice. Special colours are available, however minimum order, lead
time, and pricing considerations apply.


Click here for details

Cartridges
Cartridges with Plungers inserted

Description

Description & Part Number
CP 2.5 oz. (65cc) LD 220323
CP 2.5 oz. (65cc) HD 220324
CP 6 oz. (170cc) LD 220325
CP 6 oz. (170cc) HD 220326
CP 8 oz. (230cc) LD 220327
CP 8 oz. (230cc) HD 220328
CP 12 oz. (340cc) LD 220329
CP 12 oz. (340cc) HD 220330
CWP 1 oz. (30cc) LD 232375
CWP 2.5 oz. (65cc) LD 220331
CWP 2.5 oz. (65cc) HD 220332
CWP 6 oz. (170cc) LD 220333
CWP 6 oz. (170cc) HD 220334
CWP 8 oz. (230cc) LD 220335
CWP 8 oz. (230cc) HD 220336
CWP 12 oz. (340cc) LD 220337
CWP 12 oz. (340cc) HD 220338
CWP 20 oz. (610cc) HD 230231
CWP 32 oz. (950cc) SHD white 233710
CWP 1/10 gallon (310cc) HD 230268

CP and CWP cartridges are the standard Semco® cartridge with either a P or WP plunger inserted. This inserted
plunger allows for filling from the dispensing end, reducing the potential for air entrapment and improving
production rates.


Click here for details

Cart With Plungers
Plungers Only

Description

Description & Part Number
1 oz. WP-Plunger LD (30cc) 232364
P-Plunger LD (black) 220252
WP-Plunger LD 220259
WP-Plunger HD 220260
PRS-Plunger LD 234414
20/32 oz. WP-Plunger LD (610/950) 229221
20/32 oz. WP-Plunger HD 232374
1/10 gallon WP-Plunger LD (310 cc) 229756

Precision molded plungers are available in three styles. Each style has its own functional characteristics.
All are designed to fit the cartridge contour, assuring complete dispensing and the elimination of waste.
The WP or Wiper Plunger has the highest amount of interference. This provides the most complete wiping action
on the cartridge inside diameter. The P-plunger has medium interference. It provides clean wiping action, inserts
easily, and allows evacuation of entrapped air. The PRS or Pressure Relief Plunger has the least interference. It
has been specifically designed to be easily inserted and reduce air entrapment during filling and dispensing. This
dramatically reduces problems with dripping or stringing during dispensing.


Click here for details

Plungers Only
Seals and Flange Caps

Description

Description & Part Number
1 oz. F-Cap (red) (30cc) 232452
F-Cap (red) 220238
1/10 gallon F-Cap (red) (310 cc) 230502
20 & 32 oz. F-Cap (red) (610/950) 230586
S Seal (red) 220257
TS Seal (red) 220245
Threaded Cap (red) 234411

Seals and Flange Caps are used to ensure retention of the plunger during shipping and storage. The standard colour
is red. Special colours are available, however minimum order, lead time, and pricing considerations apply.
The Flange cap or F-cap is designed to fit over the large open end of the cartridge. There are three seal styles for the
dispensing end. The TC-seal is a threaded part that matches perfectly with the neck. The TS-seal contacts on three
surfaces round and inside the neck of the cartridge. The S-seal fits over the outside of the neck only.


Click here for details

Seals And Flange Caps
Sealant Smoothing Tools

Description

Description & Part Number
Spatula 231349
Spatula 226241
Spatula 226242
Spatula 226243
Scraper 234350
Sealant spreader 229394
Comb spreader 229395
Spatula kit
(226241, 226242, 226243) 226244

sealant-smoothing-tools-sizes.jpg#asset:1713


Click here for details

Sealant Smoothing Tools
Fillet Nozzles

Description

Description & Part Number
425 Nozzle 232499
426 Nozzle 232500
427 Nozzle 232501
428 Nozzle 232502
429 Nozzle 232590

Semco® Fillet nozzles consistently apply sealant fillets over lap joints. These nozzles eliminate the need for tooling the sealant
with spatulas, thereby increasing productivity. The model 425, 426, 427, and 428 nozzles have a built-in step to guide the nozzle along the lap joint. This produces a smooth, uniform fillet. The model 429 nozzle has no step, offering versatility when used at odd angles and in confined spaces. These disposable nozzles are precision molded and have a 1/4" (6mm) NPT male thread to fit Semco® 1, 2.5, 6, 8, 12, 20, 32 oz. and 1/10 gallon disposable cartridges.When these nozzles are used in conjunction with a Semco® 250-A sealant gun, a smooth,
uniform fillet can be applied each time.

Fillet nozzles sizes


Click here for details

Nozzles
Ribbon Nozzles

Description

Description & Part Number

8613 Nozzle 220572
8615 Nozzle 220574
8630 Nozzle 220581
8643 Nozzle 220586
8645 Nozzle 220587
8646 Nozzle 220588
8648 Nozzle 220589

These disposable nozzles are precision molded and have a 1/4" (6mm) NPT male thread to fit Semco® 1, 2.5, 6, 8, 12, 20, 32 oz., and
1/10th gallon disposable cartridges. A wide variety of specialty ribbon nozzles are available in various thicknesses and widths and are
designed to better meet your application needs.

Ribbon-Nozzles sizes


Click here for details

Nozzles
Semco 250 A gun with 250 Retainers

Description

Model 250-A Gun (with handle)
Description & Part Number
1 oz. (30 cc) 250015
2.5 oz. (65 cc) 250255
6 oz. (170 cc) 250065
8 oz. (230 cc) 250085
12 oz. (340 cc) 250125
Gun without retainer 250000

250 Retainers
Description & Part Number
1 oz. (30 cc) 231611
2.5 oz. (65 cc) 220256
6 oz. (170 cc) 220928
8 oz. (230 cc) 220926
12 oz. (340 cc) 220923

The Semco® model 250-A sealant gun is the standard of the aerospace and electronics industries. It is designed for
the quiet, pneumatic application of sealants, adhesives, potting compounds, and other materials packaged in Semco®
disposable cartridges or Semkit® packages for multi-component materials.

All Semco® retainers are 100 psi (6.9 bar) pressure rated and are
designed for use with Semco® guns, cartridges, and dispensing
systems.

Click here for details

250 A Gun And Retainers
Semco 550 Sealant Gun

Description

Model 550 gun
Description & Part Number
1/10 gallon (310ml) 231551
20 oz. (610ml) 231218
32 oz. (950ml) 233688

550-retainers.jpg#asset:1723

Description & Part Number
20 oz. assembly 229752
includes bezel and retainer
32 oz. assembly 233695
includes bezel and retainer
1/10 gallon 231903

Click here for details

Sealant 550 Gun
Semmixer Nozzles

Description

1:1/2:1 4:1/10:1
50 200/400 50 200/400
MA 3.0-07-S MC 05-18 MX 3.0-17-S MCX 08-18
MA 3.0-13-S MC 05-24 MX 4.0-17-S MCX 08-24
MA 3.0-17-S MC 05-32 MX 5.4-17-S MCX 10-12
MA 4.0-13-S MC 06-18 MCX 10-18
MA 4.0-17-S MC 06-24 MCX 10-24
MA 5.4-07-S MC 06-32 MCX 13-12
MA 5.4-13-S MC 08-18
MA 5.4-17-S MC 08-24
MA 5.4-21-S MC 08-32
MA 6.3-12-S MC 10-18
MA 6.3-17-S MC 10-24
MA 6.3-21-L MC 10-32
MA 6.3-21-S MC 13-18
MA 6.8-12-I MC 13-24
MC 13-32

Click here for details

Semmixer Nozzle
Semco Hybrid Pistons

Description

Description & Part Number
5cc P-Piston, yellow 360505
5cc WP-Piston, red 360504
10cc P-Piston, yellow 361005
10cc LF-Piston, white 361035
10cc NI-Piston, blue 361008
30cc/55cc P-Piston, yellow 363005
30cc/55cc LF-Piston, white 363035
30cc/55cc NI-Piston, blue 363008

Hybrid Pistons

There are three different pistons to meet your application needs: A micro-interference fitting P-piston, a low friction
piston (LF), and a non-interference fitting piston (NI).
The higher the interference, the cleaner the wiping action on the inner diameter of the syringe barrel. However, this
increases the potential for air-entrapment. You may want to sample a variety of pistons to find the right product for
your material and application. Each piston is molded from polyethylene and meets the rigid requirements of high
tech industries.


Click here for details

Hybrid Syringe Pistons
Semco Flange Caps

Description

Description & Part Number
5cc Flange cap 360503
10cc Flange cap 361003
30cc/55cc Flange cap 363003

Flange CapFlange Cap

Flange caps are designed to seal the large open end of the syringe, ensuring the piston is contained and that no contaminants come in contact with material during storage and shipment. All hybrid flange caps have a special tamper evident feature. In order to remove the cap, the user must detach the safety seal, which is then used as a pull ring to remove the cap, clearly identifying if the product has been opened.


Click here for details

Flange Caps
Semco Tip Caps

Description

Description & Part Number
Black spike tip cap 310045
Grey rubber tip cap 232683
Red plastic tip cap 232991

Tip caps are used to seal the syringe dispensing tip during storage and shipment. Three different styles are available
to fit any Luer Lock or Luer Slip connection. Our patented black spike tip cap has a stem or “spike” that is inserted
into the syringe dispensing tip. This helps evacuate air during and after filling. The large flat surface enables the user
to store the syringe with the dispensing tip down. This allows any existing air to migrate toward the syringe piston,
where it can be easily evacuated.


Click here for details

Tip Caps
Dispensing Needles / Tips

Description

E/ST Series Blunt Luer Lock Tips

Part# Gauge I.D. (inches) I.D. (mm) Colour
E14-1/2 14 0.063 1.60 Dk.Green
E15-1/2 15 0.054 1.37 Orange
ST18-1/2* 18 0.033 0.84 Pink
ST19-1/2* 19 0.027 0.69 Brown
ST20-1/2* 20 0.023 0.58 Yellow
ST21-1/2* 21 0.020 0.51 Green
ST22-1/2* 22 0.016 0.41 Black
ST23-1/2* 23 0.013 0.33 Lt. Blue
ST25-1/2 25 0.010 0.25 Dk. Blue
ST26-1/2 26 0.009 0.23 Beige
ST27-5/16 27 0.008 0.20 Grey
ST30-5/16 30 0.006 0.15 Lavender

Dispensing-Needles-2.jpg#asset:1736

TT Series Maximum Flow Tips

Part# Gauge I.D.(inches) I.D. (mm) Colour
TT14 14 0.063 1.60 Tan
TT16 16 0.047 1.19 Grey
TT18 18 0.033 0.84 Green
TT20 20 0.023 0.58 Pink
TT22 22 0.016 0.41 Blue

CTLL Series Flexible Polyethylene Tips

Part# Gauge I.D. (inches) I.D. (mm) Colour
CT 16LL 16 0.047 1.19 Grey
CT 18LL 18 0.033 0.84 Green
CT 20LL 20 0.023 0.58 Pink
CT 22LL 22 0.016 0.41 blue



Click here for details

Dispensing Needles
SCS 1200 Construction

Description

SCS1200 Construction sealant is a proven, high-strength, acetoxy-cure silicone used for glazing applications. Permanently flexible with excellent adhesion, it is able to form a strong, waterproof seal that can withstand harsh weather for decades.

SCS1200 Construction sealant is 100% silicone with exceptional strength and a fast cure time. Its properties make it an ideal candidate for butt joint, structural, and general glazing. It is proven in protective glazing applications and in adding stiffening elements to glass and building panels. SCS1200 Construction sealant can secure glass to frame without a primer, forming a seal that will not crack, shrink or separate.

SCS1200 Construction sealant securely bonds without a primer to most nonporous construction materials. It can be used with many substrates and finishes, including glass, glass coatings, polycarbonate, vinyl, plastics, ceramic frits, fluoropolymer and powder coated paints, conversion coatings, and anodized aluminum.

100% silicone

  • One-part, acetoxy cure sealant
  • Exceptional strength
  • Fast cure rate
  • Primerless adhesion

Click here for details

Specialty Scs1200 Construction
Parker - Chobond 1075 + Primer

Description

CHO-BOND 1075 is used both for bonding EMI gaskets and for providing EMI shielding and environmental protection as a caulk. It is specifically recommended for bonding CHO-SEAL 1285 conductive elastomer gaskets (silver-plated-aluminum filled silicone).

Click here for details

Chobond 1075 Primer
Momentive - RTV 133

Description

RTV133 black, one-component, ready-to-use, silicone rubber adhesive sealant is an excellent candidate to
consider for use in applications in the electronic, aerospace, appliance, transportation and other industries
where resistance to burning of the finished product is a significant design consideration. On exposure to
moisture in the air at room temperature, this adhesive sealant cures to a tough, durable, resilient silicone
rubber. It utilizes an atomospheric moisture cure system, which releases an alcohol vapor from the sealant
surface during cure. RTV133 sealant offers generally low odor cure with virtually no unpleasant smell or
pungent cure by-products. It is, however, somewhat slower curing both in tack-free time and cure-through
time than many atmosheric moisture cure silicone adhesive sealants that give off acetic acid vapors as a
cure by-product.

Click here for details

Rtv 133
Permatex 98D 80063

Description

Red colored, all-purpose sealant that holds even the heaviest of gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, and metal gaskets. Sets quickly to a very tacky film. Suitable to 500°F (260°C). Contains no ozone-depleting compounds. Resists gasoline, oil, kerosene, propane and butane.

Note for 2019:
Please be aware that this product will be discontinued. Full shelf life is unavailable.

Click here for details

Permatex 98 D 80063
Vibra-Tite VC-3

Description

Locking and sealing

Vibra-Tite VC-3 is a powerful locking and sealing coating for threaded fasteners that works on the principle of “friction through viscosity.” It utilizes a special blend of acrylic resins to prevent fasteners from loosening — even under extreme vibration.

Click here for details

Vibra Tite Vc 3 Threadmate
PPG - PS 872 B2

Description

P/S 872 Class B is a conductive lightning strike, corrosion inhibitive sealant. It has a service temperature range from -67°F (-55°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). The cured sealant maintains electrical continuity in a highly
torqued fay surface for certain aircraft applications. This material acts an effective barrier against the common causes of corrosion on aluminum alloys or between dissimilar metals. The cured material is resistant to intermittent exposure to both jet fuel and aviation gas.
P/S 872 Class B is a two part, aluminum filled, manganese dioxide cured, polysulfide compound. The uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having
excellent adhesion to common aircraft substrates. The following tests are in accordance with Lockheed STM40-114 Class B specification test methods.

Click here for details

Ps 872 B2
PPG - CA1010

Description

CA 1010 mastinox chromate free jointing compound.

Click here for details

Ca1010 1160
Dow Corning - Dowsil 786

Description

Silicone rubber sealant for surfaces, showers, tubs, sinks and plumbing fixtures which contains an antimicrobial. Product has been
tested against a spectrum of microbes.
APPLICATIONS
DOWSIL™ 786 Silicone Sealant is designed to seal nonporous surfaces around showers, tubs, sinks and plumbing fixtures where conditions of high humidity and temperature extremes exist. Typical applications include:
• Sealing around shower-tub enclosures, tubs, sinks, urinals and whirlpools
• Sealing around bathroom fixtures
• Waterproofing rimless sinks
• Ceramic tile grouting

Click here for details

Dowsil 786
Dowsil - Q4-2817

Description

One part, ready to use, high strength solventless fluorosilicone elastomer paste

APPLICATIONS
• Developed for use on equipment exposed to solvents, oil and fuels.
• Protects surfaces exposed to fuel from erosion and corrosion.
• Applications include bonding or sealing of components exposed for long periods to moisture vibration, shock, fuel and solvents.
• Excellent material for sealing aircraft fuel tanks.

Click here for details

Dowsil Q4 2817 Sealant
Everseal 483

Description

EverSeal 483 Pre-Applied Liquid Thread Sealant is the water-based non-toxic thread sealant UL approved for Air, Nitrogen, Water, Propylene Glycol and Glycerol Anti-Freeze Solutions. EverSeal 483 is also certified to NSF/ANSI Standard 14 and material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180°F).

Click here for details

Everseal 483
Delo ML 5298

Description

- high-viscous, run-resistant setting
- removal from large sealing areas is difficult
- high viscous setting allows bridging or larger gaps
- reduced curing times with activator DELO-QUICK
- excellent curing even on highly passivated surfaces by acivating the surfaces with DELO-QUICK
- specific low strength, removable

Click here for details

Delo Ml 5298
Ruscoe 12-3 self leveling rubber sealant

Description

The Ruscoe Nitrile Rubber Sealant is an aluminum fortified adhesive formula that incorporates the protective and elastic qualities of synthetic elastomers. It does not require any priming on properly prepared surfaces and can be applied at a temperature range of 40 degrees to 100 degrees Fahrenheit. This sealant is consisted of 3 different options, the 12-1 Seam Sealer, 12-3 Self-Leveling, and the 12-4 Non-Sag. The 12-1 seam sealer is recommended for sealing openings less than 1/8in. and can be used as an effective sealant against chemicals, water, air and dirt for sealing seams in downspouts, gutters, chimney flashing, animal feeders, wood, ceramic, concrete, brick, metal, stone, masonry, marble, and glass. The 12-3 Self-Leveling sealant is recommended for sealing openings greater than 1/8in. on areas such as metal buildings, metal or wood doors, windows, HVAC, concrete, stone, marble, glass, and more. The 12-4 Non-Sag sealant is used for sealing openings and lap joints greater than 1/8in. and can be used against water, chemicals, mobile homes, concrete, wood, metal, HVAC, and more. Ruscoe recommends that the 12-1 Seam Sealer and the 12-3 Self-Leveling only be used for sealing horizontal seams only, while the 12-4 Non-Sag can be used on horizontal, vertical, over-head, slanted, or angular surfaces. Cleans up with acetone. Base Polymer: Nitrile Rubber.

Click here for details

Ruscoe I2 3 Self Leveling Rubber Sealant
TOP